Old school executioner upgrade/restore
#2
Gold Member

Joined: Jan 2002
Posts: 702
Likes: 26
From: Southern, IL.
How old do you want, I have a 1990 in excellent cond, has original paint, custom built 540 cu. inch Merlin's, Bravo 1's w/ heavy duty gimbals and Hydromotive nose cones, I'll take some engine and interior pics.
Last edited by 253; 01-02-2013 at 04:02 PM.
#7
Registered

Joined: Mar 2008
Posts: 3,306
Likes: 39
From: lockport ny
cobra 750's speedmaster 4's on boxes. crash boxes. 101 so far. it was a really fun project. drives are a little deep could gain a few more mph but the handling and overall driveability of the boat is worth leaving them down in the water
#8
Registered
Joined: Dec 2011
Posts: 363
Likes: 0
Here are some videos of my '85 12 Meter. It has Merc Racing 500 HP's with B&M Blowers and some other goodies dynoed at 698 HP with Huber 1350 Tranies, Stellings Headers and SSM #3 Drives. I love the set up so far but still have some tweaking to do. 89 MPH by GPS so far, hoping for a little more.
http://www.youtube.com/watch?v=N1fEape5ZEw
http://www.youtube.com/watch?v=dNV472DI1F8
http://www.youtube.com/watch?v=F6fYN2xAdD4
http://www.youtube.com/watch?v=N1fEape5ZEw
http://www.youtube.com/watch?v=dNV472DI1F8
http://www.youtube.com/watch?v=F6fYN2xAdD4
#10
Registered

Joined: Jul 2004
Posts: 11,332
Likes: 73
From: chicago
Heres my tub...
1990 38 Fever
Engines: 468CI B&M 420 Blowers off a 800sc, dart alum race series heads, 6lbs of boost=800HP
Drives: SSM IV No boxes 1.5'' Below bottom
Huber 1200 Trannys
Stellings Green Headers with Dry Tails
So Far conservative tune 88MPH Turning 17x28 4 Blades at 5600RPM. (engines only make 760hp at 5600). Still need to play with jetting and props. A little video of me horsin around
[youtube]http://www.youtube.com/watch?v=BYxgYc_Sddc[/youtube]
1990 38 Fever
Engines: 468CI B&M 420 Blowers off a 800sc, dart alum race series heads, 6lbs of boost=800HP
Drives: SSM IV No boxes 1.5'' Below bottom
Huber 1200 Trannys
Stellings Green Headers with Dry Tails
So Far conservative tune 88MPH Turning 17x28 4 Blades at 5600RPM. (engines only make 760hp at 5600). Still need to play with jetting and props. A little video of me horsin around
[youtube]http://www.youtube.com/watch?v=BYxgYc_Sddc[/youtube]
Last edited by MILD THUNDER; 01-02-2013 at 06:37 PM.



