Notices

pair of bbc motors

Thread Tools
 
Old 01-19-2013, 02:41 PM
  #1  
Platinum Member
Platinum Member
Thread Starter
iTrader: (3)
 
TomFTM's Avatar
 
Join Date: Dec 2000
Location: Glen Cove ,NY 11542
Posts: 2,331
Received 74 Likes on 47 Posts
Default pair of bbc motors

2 used big block chevy 454 motors, gen 4 bowtie blocks,merlin heads,crane roller rockers,10 qt canton pans, gm forged cranks , dimple rods , wiend intakes , 850 holleys. hyd. flat tappet cams. motors came out of a local boat that I purchased from the marina that was sitting for a few years. These motors had some exterior scaling which I cleaned of and painted. I put new water pump housings and impellers in bolted on a set of test headers and ran them on the hose. Both motors tested good with compression check . I did know the previous owner and the boat was barely used and was kept on a hoist and always flushed. These are complete less exhaust. $3800 each or $7400 for the pair

Tom 516-609-0499
Attached Thumbnails pair of bbc motors-002.jpg   pair of bbc motors-005.jpg   pair of bbc motors-001.jpg  

TomFTM is offline  
Old 01-21-2013, 10:10 AM
  #2  
Platinum Member
Platinum Member
Thread Starter
iTrader: (3)
 
TomFTM's Avatar
 
Join Date: Dec 2000
Location: Glen Cove ,NY 11542
Posts: 2,331
Received 74 Likes on 47 Posts
Default

as per the pm questions . The old owner claimed they were approx. 500hp.
TomFTM is offline  
Old 01-22-2013, 10:37 AM
  #3  
Platinum Member
Platinum Member
Thread Starter
iTrader: (3)
 
TomFTM's Avatar
 
Join Date: Dec 2000
Location: Glen Cove ,NY 11542
Posts: 2,331
Received 74 Likes on 47 Posts
Default

casting number 10051107
Attached Thumbnails pair of bbc motors-003.jpg  
TomFTM is offline  
Old 01-22-2013, 08:20 PM
  #4  
Registered
 
Join Date: May 2009
Location: windham nh
Posts: 40
Likes: 0
Received 0 Likes on 0 Posts
Default motors

7,000 for motors pick up this weekend
corvettez06 is offline  
Old 01-23-2013, 08:26 PM
  #5  
Platinum Member
Platinum Member
Thread Starter
iTrader: (3)
 
TomFTM's Avatar
 
Join Date: Dec 2000
Location: Glen Cove ,NY 11542
Posts: 2,331
Received 74 Likes on 47 Posts
Default

Originally Posted by corvettez06
7,000 for motors pick up this weekend
sent u a pm .
TomFTM is offline  
Old 01-25-2013, 10:19 AM
  #6  
Registered
iTrader: (4)
 
Rookie's Avatar
 
Join Date: Jan 2003
Location: Grand Rapids, MI
Posts: 5,711
Received 1,217 Likes on 586 Posts
Default

Originally Posted by TomFTM
casting number 10051107
TTT
Nice blocks. To bad you weren't just selling the blocks. Those could make some nice 540's+.

http://www.s-series.org/htm/tech/GMP...ts/099-104.pdf

Last edited by Rookie; 01-25-2013 at 10:23 AM.
Rookie is offline  
Old 01-25-2013, 11:23 AM
  #7  
Registered
 
Join Date: Jun 2012
Posts: 20
Likes: 0
Received 0 Likes on 0 Posts
Default

Do you know what heads are on it?
Thanks
kevinp16 is offline  
Old 01-27-2013, 03:46 PM
  #8  
Registered
iTrader: (1)
 
Join Date: Feb 2004
Posts: 1,170
Likes: 0
Received 0 Likes on 0 Posts
Default

did these sell
cig20 is offline  
Old 01-27-2013, 05:25 PM
  #9  
Platinum Member
Platinum Member
Thread Starter
iTrader: (3)
 
TomFTM's Avatar
 
Join Date: Dec 2000
Location: Glen Cove ,NY 11542
Posts: 2,331
Received 74 Likes on 47 Posts
Default

Deal pending.
TomFTM is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.