Trim Tab thru hull fitting where to by
#1
Have a set of K Planes and need to replace the thru hull fitting for the lines. One tab has Stainless there other had aluminum and they oxidized thru so now I have to find them. I assume they are available just not sure if its a merc thing or others would stock or have them, I.E. bam cp rex ect.
Thanks
Mike
Thanks
Mike
#2
Registered
Joined: Sep 2006
Posts: 1,391
Likes: 0
From: CapeComa,FL
If you are talking about the tube that threads into the back of the tab bracket, and is threaded in the center on both ends for the hydraulic lines, I bought them through land and sea. I think they were about 25 each, I needed 4. They came stainless....
#4
Registered
Joined: Sep 2006
Posts: 1,391
Likes: 0
From: CapeComa,FL
http://www.boatpartssource.com/pages...COMMON39629664
Hope that works.....too expensive though. My land and sea acct. Would not let me copy on ipud.....
How much for the pumps....
Hope that works.....too expensive though. My land and sea acct. Would not let me copy on ipud.....
How much for the pumps....




