shipping an engine to england.
01-28-2015 | 04:47 PM
#2
Registered
Joined: Aug 2013
Posts: 1,037
Likes: 3
From: FredVegas, Va
Going to have to build a FULL crate for it, and bolt it in somehow. I would try to get him to setup all the shipping details and then you would most likely have to take the crated engine to a shipping depot to get taken to the shipping port and onto a boat.
If the deal goes through, an easier start is to find a pallet already built, and use that and cut it in down to a smaller size if needed.
After you get it bolted to the pallet, wrap it in the clear plastic wrap you can buy at Lowes/Home Depot ratchet strap it down and then build the top part of the crate with 2x4's. Staple some cardboard around it to kinda close it in so to speak.
If the deal goes through, an easier start is to find a pallet already built, and use that and cut it in down to a smaller size if needed.
After you get it bolted to the pallet, wrap it in the clear plastic wrap you can buy at Lowes/Home Depot ratchet strap it down and then build the top part of the crate with 2x4's. Staple some cardboard around it to kinda close it in so to speak.
