Guess the new power game!
09-06-2018 | 03:06 PM
#1
Thread Starter
Registered
Joined: Oct 2013
Posts: 2,888
Likes: 148
From: SF Bay Area
Guess the new power game!
After searching high and low for a local dyno I can’t find one to test my build so everyone is welcome to take a stab at it.
525EFI cam LIFT: .610"/.627" DURATION: 289°/297°
Edelbrock Performer RPM Oval heads with the chambers cleaned up.
Performer Rpm Airgap intake gasket matched
QF850m carb
Comp Cams magnum rockers
~10:1cr
09-06-2018 | 09:20 PM
#9
Registered
Joined: Nov 2004
Posts: 14,068
Likes: 3,668
From: On A Dirt Floor
09-06-2018 | 09:47 PM
#10
Thread Starter
Registered
Joined: Oct 2013
Posts: 2,888
Likes: 148
From: SF Bay Area
This guy doing pretty much the same build but with a smaller cam and lower compression got 588, but I’ll guess 575 which would be plenty. I’m still looking for a real dyno to find out.
Cam in the similar build. 242/248 duration, 0.566/0.566 lift, 112 LSA COMP stick.
