Bravo 1x top cap
05-19-2021 | 01:18 PM
#1
Thread Starter
Registered
Joined: May 2021
Posts: 1
Likes: 0
From: Atlanta
Bravo 1x top cap
Hi all,
i purchased a drive shower and when removing the top caps 4 bolts, the cap raised up slightly allowing gear oil to spill down the drive. I installed the shower and spacers and the new bolts and torqued the bolts to 25 ft lbs. question is, Do I need to replace the large and small O rings because the cap seal was breached?
This is on a Bravo 1 x drive.
Thanks!
Neil
i purchased a drive shower and when removing the top caps 4 bolts, the cap raised up slightly allowing gear oil to spill down the drive. I installed the shower and spacers and the new bolts and torqued the bolts to 25 ft lbs. question is, Do I need to replace the large and small O rings because the cap seal was breached?
This is on a Bravo 1 x drive.
Thanks!
Neil
