Cigarette Sun Pad Logo
#1
Thread Starter
Registered

Joined: Nov 2012
Posts: 141
Likes: 39
From: H.B. CA
Contacted Cigarette to see if I can have a sun pad logo made for my 2000 Top Gun and this is what they sent me after 2 weeks of waiting:
IMPORTANT:
Please note our customer support agents are only able to provide support and parts for vessels within seven (7) years of age. For older vessels we recommend contacting a local service shop or your Cigarette dealership. Additionally, Cigarette uses many readily available parts which may be purchased through marine supply shops.
Additionally, due to available resources we are also unable to provide:
“Boat lookups” - We are unable to do lookups of old vessels to determine paint codes or other items of interest.
Assistance in rigging or X-dimensions - Please see a qualified mechanic and/or engineer for this assistance
CE Certificates & DoCs - These are only valid for new vessels leaving the factory certified Trailer & bunk drawings for old vessels - Your lift or trailer manufacturer can measure the hull bottom
Sorry for the inconvenience but we are unable to help you. Best of luck and feel free to contact us for inquiries within our guidelines.
Thank you,
Anyone know someone that is capable of making one for me in California or anywhere else?
IMPORTANT:
Please note our customer support agents are only able to provide support and parts for vessels within seven (7) years of age. For older vessels we recommend contacting a local service shop or your Cigarette dealership. Additionally, Cigarette uses many readily available parts which may be purchased through marine supply shops.
Additionally, due to available resources we are also unable to provide:
“Boat lookups” - We are unable to do lookups of old vessels to determine paint codes or other items of interest.
Assistance in rigging or X-dimensions - Please see a qualified mechanic and/or engineer for this assistance
CE Certificates & DoCs - These are only valid for new vessels leaving the factory certified Trailer & bunk drawings for old vessels - Your lift or trailer manufacturer can measure the hull bottom
Sorry for the inconvenience but we are unable to help you. Best of luck and feel free to contact us for inquiries within our guidelines.
Thank you,
Anyone know someone that is capable of making one for me in California or anywhere else?
#5
Registered

Joined: May 2009
Posts: 3,895
Likes: 123
From: Chicago, IL; Onekama, MI
Contacted Cigarette to see if I can have a sun pad logo made for my 2000 Top Gun and this is what they sent me after 2 weeks of waiting:
IMPORTANT:
Please note our customer support agents are only able to provide support and parts for vessels within seven (7) years of age. For older vessels we recommend contacting a local service shop or your Cigarette dealership. Additionally, Cigarette uses many readily available parts which may be purchased through marine supply shops.
Additionally, due to available resources we are also unable to provide:
“Boat lookups” - We are unable to do lookups of old vessels to determine paint codes or other items of interest.
Assistance in rigging or X-dimensions - Please see a qualified mechanic and/or engineer for this assistance
CE Certificates & DoCs - These are only valid for new vessels leaving the factory certified Trailer & bunk drawings for old vessels - Your lift or trailer manufacturer can measure the hull bottom
Sorry for the inconvenience but we are unable to help you. Best of luck and feel free to contact us for inquiries within our guidelines.
Thank you,
Anyone know someone that is capable of making one for me in California or anywhere else?
IMPORTANT:
Please note our customer support agents are only able to provide support and parts for vessels within seven (7) years of age. For older vessels we recommend contacting a local service shop or your Cigarette dealership. Additionally, Cigarette uses many readily available parts which may be purchased through marine supply shops.
Additionally, due to available resources we are also unable to provide:
“Boat lookups” - We are unable to do lookups of old vessels to determine paint codes or other items of interest.
Assistance in rigging or X-dimensions - Please see a qualified mechanic and/or engineer for this assistance
CE Certificates & DoCs - These are only valid for new vessels leaving the factory certified Trailer & bunk drawings for old vessels - Your lift or trailer manufacturer can measure the hull bottom
Sorry for the inconvenience but we are unable to help you. Best of luck and feel free to contact us for inquiries within our guidelines.
Thank you,
Anyone know someone that is capable of making one for me in California or anywhere else?
This is one area Cigarette FAILS at. Both Formula and Outerlimits will give you any and all info about any boat they built. Outerlimits sent me complete build sheets on two boats I was looking at, and they knew I was only seriously interested in them and did not own either. For this reason, if I replace my 39 TG, it will be an Outerlimits it is replaced with.
#6
Registered

Joined: Aug 2020
Posts: 76
Likes: 15
From: Charlottesville, VA & Thousand Islands, NY
Contacted Cigarette to see if I can have a sun pad logo made for my 2000 Top Gun and this is what they sent me after 2 weeks of waiting:
IMPORTANT:
Please note our customer support agents are only able to provide support and parts for vessels within seven (7) years of age. For older vessels we recommend contacting a local service shop or your Cigarette dealership. Additionally, Cigarette uses many readily available parts which may be purchased through marine supply shops.
Additionally, due to available resources we are also unable to provide:
“Boat lookups” - We are unable to do lookups of old vessels to determine paint codes or other items of interest.
Assistance in rigging or X-dimensions - Please see a qualified mechanic and/or engineer for this assistance
CE Certificates & DoCs - These are only valid for new vessels leaving the factory certified Trailer & bunk drawings for old vessels - Your lift or trailer manufacturer can measure the hull bottom
Sorry for the inconvenience but we are unable to help you. Best of luck and feel free to contact us for inquiries within our guidelines.
Thank you,
Anyone know someone that is capable of making one for me in California or anywhere else?
IMPORTANT:
Please note our customer support agents are only able to provide support and parts for vessels within seven (7) years of age. For older vessels we recommend contacting a local service shop or your Cigarette dealership. Additionally, Cigarette uses many readily available parts which may be purchased through marine supply shops.
Additionally, due to available resources we are also unable to provide:
“Boat lookups” - We are unable to do lookups of old vessels to determine paint codes or other items of interest.
Assistance in rigging or X-dimensions - Please see a qualified mechanic and/or engineer for this assistance
CE Certificates & DoCs - These are only valid for new vessels leaving the factory certified Trailer & bunk drawings for old vessels - Your lift or trailer manufacturer can measure the hull bottom
Sorry for the inconvenience but we are unable to help you. Best of luck and feel free to contact us for inquiries within our guidelines.
Thank you,
Anyone know someone that is capable of making one for me in California or anywhere else?
#7
Thread Starter
Registered

Joined: Nov 2012
Posts: 141
Likes: 39
From: H.B. CA
The lady that answers the phone will not put you thru to talk to anyone, she tell you to send an email. So you tell her you sent 3 emails and she says send another
#8
#9
Registered

Joined: Jun 2009
Posts: 9,946
Likes: 6,418
From: Chicago



