Blower height??
12-08-2002 | 10:24 AM
#3
Registered
Joined: May 2001
Posts: 1,673
Likes: 1
From: Lake Lanier, GA
DanB
Get in touch with Marv at The Blower Shop he can give you all of the exact sizes. www.theblowershop.com
Get in touch with Marv at The Blower Shop he can give you all of the exact sizes. www.theblowershop.com
12-08-2002 | 10:39 AM
#4
Registered
Joined: Oct 2000
Posts: 486
Likes: 0
From: claymont, DE, USA
Dan
The rotor housing itself is 7.5" the intake manifold is around 5" the intercooler (super chiller) is 4" then depending on which plate you use can add another inch plus the carb and a scoop which will be close to 6"
It looks like close to 23" from lifter valley deck to top of scoop.
hope this helps
DAVE
The rotor housing itself is 7.5" the intake manifold is around 5" the intercooler (super chiller) is 4" then depending on which plate you use can add another inch plus the carb and a scoop which will be close to 6"
It looks like close to 23" from lifter valley deck to top of scoop.
hope this helps
DAVE
12-10-2002 | 05:07 PM
#7
Thread Starter
Charter Member #71
Joined: Oct 2000
Posts: 924
Likes: 14
From: Phoenix, AZ
Don
Just pulling the motor out next week for a 100 hr tune and freshen. Tossen a few things around in my head. The blower being one of them. I'll have it ready for ya when ya get here
Dan
Just pulling the motor out next week for a 100 hr tune and freshen. Tossen a few things around in my head. The blower being one of them. I'll have it ready for ya when ya get here
Dan
