Need advice on head and cam selection for a Procharged 502 MPI
07-21-2003 | 08:45 PM
#1
Thread Starter
Registered
Joined: May 2001
Posts: 120
Likes: 0
From: Buckey, AZ
Need advice on heads and cam selection for a Procharged 502 MPI
Just popped a head gasket after 120 hours. Figured this would be a good time to upgrade to Aluminum heads and cam. I have a M-1SC 50 lb injectors AZM fuel system. I need advice.
Last edited by Cat-n-Around; 07-22-2003 at 07:55 PM.
