I am looking for a HD oil cooler that accepts -16 water lines. I would prefer one that mounts to the block but may have to settle with the remote mount type.
Thanks in advance.

Teauge had the biggest oil coolers I've seen , they donnt mount to the block tho ,on the oil line i ran #12 on the water i think it was 1 inch pipe, the get the from a industrial supply for diesel engines.dan olsen had one that mount to block but smaller

A friend of mine put a TCM on his 850, solved his oil temp problems. Eddie marine has one with the same dimensions for half the money ($300), I was wondering if they would work as well, I will be buying a pair of coolers this winter.

Paul PFaff racing engines in HB California sell a 3" oil cooler dual with thermostat that also will mount to your block.

Here is a pic! It does not accept a 16 hose more like the standard water line, I know I wasted some cash trying to make it fit a -16.


I have the bracket you can have it for $25, you will just need to buy the cooler braces, it is nice an shiny and cost me $60. I tried to use it, but my motor sits to low and the cooler hit the stringer so I had to move it.

Here it is with the water line attached!

Thanks, thats exactly what I wanted to hear!!