Nice site, They have a lot of stuff for the 3.0's. Thanks, I will be checking around before I order the stuff I need. I was also checking Diamond Marine, they seem to know set-up's on the 28's as well.

Wayne Taylor is the man with promax 300's. He can make the horsepower with his intakes and computer system, but Havasu Cig should not be low on HP with 300X's. Diamond Marine is probably the best outboard motor builder in the country, they also have a dyno. They do know quite a bit about 28 Skaters, take Charlies 28 for example. He ran 126+ with a set of diamond 2.5's, no they were not stock of course. I know Charlie knows quite a bit about setup on this boat. I am pretty sure he does all that him self, Diamond builds his motors. On this board is also T2x which has answered quite a few of my questions. He has a 28 with 300x's running in the low 120's and is very knowledgeable. I am pretty sure Ryan Beckley is very knowledgeable with 28 Skaters as well. Definately a lot of people to ask questions before you buy anything.