Re: New to me Skater.
 

The cat's out of the bag!


Here is the rugs supplied by

Custom Marine Carpet. 269-684-1922

You cut a pattern and send them to him he cuts it to fit
and supplies the snaps.
It is a true grade marine carpet with a rubber backing.

This is color Royal blue.

Re: New to me Skater.
 

Gerry,
I've got to hand it to you, that's quite a project that you bit off, and it sure looks like you're doing a great job with it!! :drink:
Stay motivated, she's a beauty!! :drink: :D :D

Dan

Re: New to me Skater.
 

I wish I had the same support from my wife! :eek:


All I have been hearing is you spend to much time and Money on that big tub!
I have to admit I have been getting frustrated with vendors.
I have come to the conclusion that it only really matters
to me. Anyway back to the "TUB"



Here is the King demon bowls finished with self etching primer
and Imron paint.

I like to mod the carbs.
blowermods
1-1 linkage
boost referance
tunnel ram floats

Re: New to me Skater.
 

What do ya think my customers say when they come in to buy
a vehicle and my desk looks like this? :eek:

Re: New to me Skater.
 

I got one together. Just waiting on Blower belts
Should be firing it up friday night.

If all goes right I will set it in the boat Saturday.

Re: New to me Skater.
 

Hearing the sound of that one firing up should speed up the build on the second one ! :D

Re: New to me Skater.
 

Dennis when I fire it up i set all the alarms off on the cars here at the dealership! :evilb:


Here is the picture of the Keith Eickert
Blower fuel rails. This is a schweet setup with return ports
and fuel pressure sender ports.
A nice clean installation.


Thanks to Brian at CP Performance on great pricing.


Gerry

Re: New to me Skater.
 

OK three things had to happen today to place on in the boat
tommarro.

1) receave mark up tailpipe from Randy at stellings.
GOT IT.

2)Receave the fittings for the fuel rail . I always start
the engines before they go in the boat.
These came in.

3)The blower belts I ran on the old heads are not long enough. The Blower shop sent them but UPS misdirected
them in CT..............Great! SETBACK.
Called Ron at the Blowershop had him send two new ones
SAT Delivery. THANKS RON!
I will refuse the others.

The reason I want to get one in is for the sake of the tailpipe
mark ups . Ya know how long it takes for custom tails
this time of year?

Waiting for the belt.
one goes in one goes to the DYno

Im going to get a beer!

Re: New to me Skater.
 

Here is how us yankees put a motor in a boat. :evilb:

Re: New to me Skater.
 

Yo G, How many tran-sexuals did you plan on fitting in that thing?