New to me Skater.
 

This is headed north.
It is a project but pretty much what I was looking for.
I am ready!

Any other 46 owners who can assist me with some measurements and questions please help.

I have to admit the size is overwhelming but as the day progressed it actually seem to get smaller. :D




Thanks in Advance
Gerry

Re: New to me Skater.
 

It has a full pleasure cockpit with a small cabin below.
my plan is to install my piston engines.


Gerry

Re: New to me Skater.
 

I could use one of these.

Re: New to me Skater.
 

You are going to LOVE that boat. Congratulations on the purchase!

Re: New to me Skater.
 

Nice for you. Congrats.
That thing is twisted :eek:
Its gonna look sic spitting flames :evilb: if you go with them.
What are you gonna name it?

Re: New to me Skater.
 

Off the top of my head came.

KNOT-RIGHT

Re: New to me Skater.
 

Peter at Skater called me today and will give some of the measurements needed to go back to pistons.

1000hp with # 6,s need ratio 1.35 figure 32 props
Drive shaft lenth from 24-30 inches.

Anyone can measure theres?
Need drive shaft lenth from transmission flange to
#6 flange.
also Crankshaft center line to bottom of hull
or any measure that will give me engine height.
a photo would be worth 1000 words.

Gerry

Re: New to me Skater.
 

pics of freedom us-1....

Re: New to me Skater.
 

You need to contact: FREEDOMUS1
He knows alot about the 46's

http://www.offshoreonly.com/forums/p...m&userid=56855

Re: New to me Skater.
 

I have been in contact with Jim.
I asked him to teach me how to run it.

Sweet ride he has..

Gerry