|
3 Attachment(s)
Going to tig weld that crack today.
These are dry exaust Stainless steel. They have the typical headerwrap. They also have a fire containment blankets. |
2 Attachment(s)
I am guessing The catch can catches maybe rain water.
Any ideas anyone? It has hose fittings on them -4 maybe Notice the end where they clamp to the combuster housing it is not rigid. Springs to absorb vibrations and misalighnment. |
Originally Posted by KNOT-RIGHT
(Post 2401711)
ICE You have a pm.
Then maybe a test spool and fire em up. Maybe I should get a video and post it. I just dont want to look like a bonehead if something goes wrong:hitfan: |
3 Attachment(s)
Originally Posted by saxman
(Post 2402477)
Well, if something goes wrong, at least your youtube vid will probably get lots of hits! :D :D Looks like you are making lot's of heading on the project. I look forward to seeing it finished. :D :D
Its got a zoom so ya can keep a safe distance. Well here is the exhaust pretty much ready for installation. I freakin Buff the Sh1t out of these chrome stacks. I only had like one piece of thread hanging from the buff pad when I was finished. |
Originally Posted by KNOT-RIGHT
(Post 2402866)
C,mon over man.... you can hold the camera:cool-smiley-027:
Its got a zoom so ya can keep a safe distance. Well here is the exhaust pretty much ready for installation. I freakin Buff the Sh1t out of these chrome stacks. I only had like one piece of thread hanging from the buff pad when I was finished. |
Originally Posted by KNOT-RIGHT
(Post 2402866)
C,mon over man.... you can hold the camera:cool-smiley-027:
Its got a zoom so ya can keep a safe distance. Well here is the exhaust pretty much ready for installation. I freakin Buff the Sh1t out of these chrome stacks. I only had like one piece of thread hanging from the buff pad when I was finished. |
3 Attachment(s)
Heres what we did today.
Nothing lined up correctly. Have to tweak the mounts. Both exhausts are in yeah! Tomorows another day. We all need a freakin drink:hitfan: |
G, those catch trays guttta be 4-rain or condensation. Is there a hole or exit port in the actual exhaust pipe to drain into the mini gutters? Man, I have to see it with my own eyes, maybe by say 11:30 am Sunday - will call 1st as instructed. - u-crazy - me too ! :cheer::throw:
|
Originally Posted by KNOT-RIGHT
(Post 2403848)
Heres what we did today.
Nothing lined up correctly. Have to tweak the mounts. Both exhausts are in yeah! Tomorows another day. We all need a freakin drink:hitfan: This man is not right. He is very very sick in the head and needs help immediately. If you see this man, that him to the nearest mental hospital and have him comitted. Your Sick Gerr-Bob... just plain sick |
Originally Posted by Bad-Genes
(Post 2404966)
This man is not right. He is very very sick in the head and needs help immediately. If you see this man, that him to the nearest mental hospital and have him comitted.
Your Sick Gerr-Bob... just plain sick Thanks for ur help Today. I could have not got that one mount completed without Yourself And Jays help:party-smiley-004: Who knows if ya continue hanging with us boat geeks You may be in danger of becomming one:D If ya stop by in tommaros blizard and the Plow truck is there and I,m no where to be found peak in the old exhaust holes from the piston engines I will be in there with a blow dryer in my pants. There comming to take me away. Ha Ha!! |
| All times are GMT -5. The time now is 03:51 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.