My 32B is heavier and wider than the classic but has run consistantly 116 with two people and 100 gals of fuel. Best number was 118.2 but it was light and air very good. I took the lower off the center motor and it ran about 96 but was still carrying the weight. The center motor really helps this hull. Fuels a ***** but its still the cheapest part of the boat. I spin a 15 3/4 x 35 on the center motor to keep the rpms down. Rev lims have been raised.

Went thru motors over winter and added a bunch of aftermarket goodies to see if it will get to 120. Dont have motors broken back in yet, but I'll see if there's any truth to the HYPE!

I'd love to see some pics of your boat if possible. Let us know how your modifications work out after break in and if you could share with us what you did, that would be awesome.

Good Luck

I will post some pics very soon ! I took it upon myself to make a fiberglass motor well for the 32 Classic outboard. Every time I would see one , i would say what the F**k !! I made a mold , then layed it up with ,White gel coat , .75 mat , 1.5 mat then Fab mat using Vinlyester resin . It will look like a new Outboard hull when I'm done !!! It helps to have a Buddy who owns a Boat shop that also builds boats!!! Anybody need a Motorwell finished in White gel coat ?

Larry

Damn, I can't wait to see what you come up with !!

p.s. I'll call you around 6 tonight.

Yea , Yea , Yea !!! Call collect if that is the reason you won't call !!! (:

Larry

Told ya !!!! Now get back to experimenting with your boat so you can per-fect MINE !!!