|
Originally Posted by da*****rcury
(Post 3291006)
UPS brought me a big box from Livorsi today, big thanks to Bill at Diamond Performance Marine... That was quick service.
Now I've got fun stuff to do on dash. Bill |
Originally Posted by glassdave
(Post 3082136)
This boat is epoxy and Kevlar and terribly difficult to cut. The biggest problem isnt necessarily with cutting through the stuff that just takes time. The biggest problem is joining the corners of cuts you made where they meet at a bulkhead or stringer. The cutting wheels are to big to get very close so you are left with a few inches that are impossible to get at and contain very thick overlaps of Kevlar. I got around this by taking a carbide hole saw (without the drill bit in it to minimize the risk of catching the outside laminate) and poking a inch and a half hole in each corner then joining all the holes with a standard seven inch carbide wheel on a Metabo cutter. (Metabos kick azz!)
not pretty . . . . . |
I'm lookin to get into an older Skater 32
then have Shaun build me 2 of those baaad boys! noli Why not three? The older boats might be heavier than the ones he's building now... |
Originally Posted by glassdave
(Post 3127903)
couple more, this thing looks even bigger all white :eek:
|
Originally Posted by da*****rcury
(Post 3165925)
this boat was raced with triple 2.5, I'm just adding one more
|
Originally Posted by da*****rcury
(Post 3187160)
Hey there okie! Yeah that's my wife's middle name, and I thought it would be appropriate
|
36 skater project
yep she is good to me.:kiss:
|
36 skater project
1 Attachment(s)
I received new back seat today and set it in along with the original front Skater seats that were used when boat was raced as Snakeman racing 2001-03
I'm currently waiting on the cockpit side panels, carbon fiber dash inserts and carpet. |
Wow!!
I like your design of the rear bench seating and colour selection. How did you measure the fit for the coaming pads? Who is doing your interior work? |
36 skater project
Thanks noli, I've got a local guy who took the old style mid nineties rear bench and with the help of pictures of other skater interiors from OSO classifieds was able to stitch what you see there. (there was considerable trial and error to get the armrests right).
patience is important |
| All times are GMT -5. The time now is 10:55 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.