Need Skater Trailer Advice
#1
Thread Starter
Registered
Joined: Feb 2010
Posts: 974
Likes: 0
My Traler For My 32 Classic Has High Bunks In Which Top Of Tunnel Sits On Bunk . Considering Changing Trailer Bunks To Lower Type In Which Bunk Rides On Inner Step . Does Anyone Have A 32 B In Whicj To Measure The Step In Which Bunk Rides On ? My Step In 1.5 " Inches , Is That Enough For Bunk To Ride On ?
Has This Type Of Trailer Ever Been Used On 32 Classic ?
Thanks
Has This Type Of Trailer Ever Been Used On 32 Classic ?
Thanks
#2
I used to have a 32 Skater with the Skater trailer that used bunks in the tunnel. The boat lift I used for 5 months a year lifted the boat by the inner spray rails you are asking about (I think they are wider than 1.5"). I also had a 30 Motion cat with a Myco trailer that used the spray rails to hold the boat. My Myco for the MTI uses the same method. Only problem with type trailer is you have to be dead on when coming on the trailer. Most of the time I need to line it up by hand. Not easy to drive on the first time
#3
Thread Starter
Registered
Joined: Feb 2010
Posts: 974
Likes: 0
Thanks For Reply ! So Do You Think 1.5 " Spray Rail Is Too Small ? The Main Reason I Was Thinking About The Change Was That The Tunnel Bunks Would Be Hard On My New Paint As With Spray Rail Bunks They Would Be Wet .
Does Anyone Know The Width Of Spray Rail For 32 ?
Does Anyone Know The Width Of Spray Rail For 32 ?




