My new 28 skater
05-28-2014 | 09:14 PM
#31
Registered
Joined: Dec 2007
Posts: 2,054
Likes: 12
From: Pompano Beach, FL
My motors were always covered in salt after a hard day of running. After I got the Nass cowlings with the air plenums installed problem solved. They stay perfectly clean. I highly recommend getting them glassed in. Had to many issues with silicon. Saves about 30lbs also.
05-31-2014 | 11:46 PM
#33
Registered
Joined: Apr 2001
Posts: 794
Likes: 0
From: Atlanta / Ft. Myers Fl.
I had Shaun Torrente , STR install a side water dump on my motors......No more Spray on the motors.....looks cool too..throwing a stream of water out the side of the bottom pan!
09-11-2014 | 07:32 AM
#34
Registered
Joined: Aug 2007
Posts: 275
Likes: 1
From: Iowa
Hey Dave I spoke with Dave Dewald he is going
To send me those props at the end of the month
To try out ! An I know you showed me a pic of your boat
At the loto but the ones you have posted here are out of this world
All I can say is that is one nice skater Wow!!!!
To send me those props at the end of the month
To try out ! An I know you showed me a pic of your boat
At the loto but the ones you have posted here are out of this world
All I can say is that is one nice skater Wow!!!!
09-11-2014 | 10:47 AM
#35
Thread Starter
Registered
Joined: Sep 2011
Posts: 689
Likes: 16
From: OKlahoma City, Lake Tenkiller, OK
Some "on the water" at Lake Tenkilller.
[ATTACH=CONFIG]529338[/ATTACH][ATTACH=CONFIG]529339[/ATTACH][ATTACH=CONFIG]529340[/ATTACH]
[ATTACH=CONFIG]529337[/ATTACH]
[ATTACH=CONFIG]529336
[ATTACH=CONFIG]529338[/ATTACH][ATTACH=CONFIG]529339[/ATTACH][ATTACH=CONFIG]529340[/ATTACH]
[ATTACH=CONFIG]529337[/ATTACH]
[ATTACH=CONFIG]529336
09-11-2014 | 11:03 AM
#36
Thread Starter
Registered
Joined: Sep 2011
Posts: 689
Likes: 16
From: OKlahoma City, Lake Tenkiller, OK
Some GoPro video from the same day on Tenkiller. I'm just learning the "GoPro" and youtube stuff.
http://youtu.be/8Doi8JXw-hU
http://youtu.be/8Doi8JXw-hU
09-11-2014 | 06:27 PM
#37
Registered
Joined: Dec 2007
Posts: 2,054
Likes: 12
From: Pompano Beach, FL
David,
Boat looks really good. Must be nice to go out on the lake and run that thing everyday and not worry about what the seas in the ocean are. We all could do some killer testing with a get together there. Keep up the good work and hope you get the boat on the lake soon after the new powerhead arrives.
Let me know about the other motor and what if anything they found.
Boat looks really good. Must be nice to go out on the lake and run that thing everyday and not worry about what the seas in the ocean are. We all could do some killer testing with a get together there. Keep up the good work and hope you get the boat on the lake soon after the new powerhead arrives.
Let me know about the other motor and what if anything they found.
09-11-2014 | 06:51 PM
#38
Thread Starter
Registered
Joined: Sep 2011
Posts: 689
Likes: 16
From: OKlahoma City, Lake Tenkiller, OK
All Skaters are welcome to get an "Un-Official" Skater Shoot-Out/Fest on Tenkiller. Great water, great weather (most of the time) good lodging and centrally located. Guys let me know if you would like to make this happen. I can put it together from the "lake" end! Hope to get it on the water soon. Thanks, Ron.
09-11-2014 | 07:45 PM
#39
Registered
Joined: Oct 2005
Posts: 1,088
Likes: 1,135
Your 28 looks absolutely STUNNING David! I really like the changes you made to the paint scheme from my 28 - the blue really sets it off! On another subject, you're overtrimmed in a few of those pictures, your 28 will actually run faster (and safer) with neutral to a little negative trim. I almost never run any positive trim w/ my 28 - the only time is in lower speed (under 90) corners to carry the bow. You've done a great job with it, glad to see you're enjoying it!
