[ATTACH=CONFIG]560984[/ATTACH] "Awesome" Larry @ least we all have a project this winter ................. Your boat! ;-)

Boat looks as good as the first day I started working on it back in the day!!!!
Looks like there could be 2 28' projects this winter

New jackplates and engines are on.....New rubrail ordered. Rigging inside as we speak.....

Jr.

[IMG][/IMG]
[IMG][/IMG]

NICE! You picked up Paul's motors? All of his stuff is immaculate.

Sad no E-Tecs but those fresh water 300s should do fine.

did this boat have k planes on it when was raced?
saw on an earlier page a pic of the dash with a 4 slot trim indicator,,,,,,
I believe ""cat can do "" boat had them didn't know mobil 1 did also,,,,
I have a 28 im going through
and gutting parts off my Excalibur to put in skater,,,all new gauges,switchplates,control;s,gps,radio ect
and have a new set of 12"x24" long tapered tabs I was thinking on putting on for for the mid speed porpous

huge tks for this pic,,,,,
don't know where u always are getting all these pics,,,,
but as some 1 else said don't stop,,,,,,,,,,

larry,,,,,do u still have then tabs u took off

Yes I still have them. They are not your average K Planes. They are composit with carbon fiber inserts. I've never seen any other like it. Maybe Double Rigged could tell you more about them. I had to cut the trim tab indicator lines in order to remove them. I have the rams and pumps for it also, not sure on the through hull fittings, i may. They all could you a good cleaning. I can get some pictures this weekend....

On a separate note, those of you mentioned Paul's motors. Do you guys have any pictures of the Nordic they came off of? I'd like to see the paint scheme......

Larry

I found 1) with the 400's

[ATTACH=CONFIG]564830[/ATTACH]

Get a hold of Scott or Steve, they are good friends of Paul ... http://www.performanceboats.com/outboard-church/