Flo Torq SSR-HD part # 8M0101601
08-21-2016 | 02:21 PM
#1
Thread Starter
Platinum Member
Joined: Mar 2005
Posts: 1,044
Likes: 3
From: Bethel Island, CA
Flo Torq SSR-HD part # 8M0101601
Anybody see anything wrong with this hub on a 100 mph boat?
https://www.mercurymarine.com/en/us/...on+Redirection
http://www.veradoclubparts.com/category_s/74.htm
https://www.mercurymarine.com/en/us/...on+Redirection
http://www.veradoclubparts.com/category_s/74.htm
08-21-2016 | 06:43 PM
#2
Registered
Joined: Dec 2007
Posts: 2,054
Likes: 12
From: Pompano Beach, FL
Hey Steve,
I would not use anything but a solid hub on a cat. With the way drives are in and out of the water you will not want to spin a hub.
We actually spun a couple on by buddies Fountain running hard in tournaments.
Just my .02 cents.
I would not use anything but a solid hub on a cat. With the way drives are in and out of the water you will not want to spin a hub.
We actually spun a couple on by buddies Fountain running hard in tournaments.
Just my .02 cents.
08-21-2016 | 07:25 PM
#3
Thread Starter
Platinum Member
Joined: Mar 2005
Posts: 1,044
Likes: 3
From: Bethel Island, CA
Thanx Ron.
