Where did you mount your AMP?
#3
On my 42 I have them in the compartment on the left side in between the seats under where the head unit goes. Two pretty big MTX's 1 1200 watt, 1 800 watt. I have one of those little clip on fans that plugs into the cig, lighter too keep them cool.
On the new 50 Nortech it looks like this.
On the new 50 Nortech it looks like this.
#5
on my 04 31 I mounted one on each side of the first compartment that backs up to the built in cooler where my power inverter/charger is located. I am a little worried that the one that is adjacent to the cooler has already went out. I wonder about condensation getting to the electronics it is a jl audio 500 for the subs.
Cass
Cass
#6
I mounted my amp under the rear bench seat, on the forward wall. You can't even see it unless you look for it. Its a Boss (I know not the greatest, but I got a deal) 4x150w.
__________________
[img][/img]
[img][/img]
#7
Originally posted by GO4BROKE
I mounted my amp under the rear bench seat, on the forward wall. You can't even see it unless you look for it. Its a Boss (I know not the greatest, but I got a deal) 4x150w.
I mounted my amp under the rear bench seat, on the forward wall. You can't even see it unless you look for it. Its a Boss (I know not the greatest, but I got a deal) 4x150w.
And speaking of the seat base thickness.....What is the best way to cut new holes to mount the Subs ? Fine tooth Jig Saw ?
Mark
#8
I screwed it to the seat base. It's about 1/2" thick. I've had it there for 4 years , no problems. A sheet metal blade in a jig saw works ok. Tough stuff. I used a die grinder with a carbide bit for the 6x9's I mounted in the base.
__________________
[img][/img]
[img][/img]




