Texoma BS Thread
#942
Registered
We got it fixed. The distributer gear was stripped, so no spark. We think it may not have been installed incorrectly, or the hold down screw could of just come loose. The new motors only had 15 hours on them. Derebery reset the distributer and checked the timing so she is running now. Probobly pull the oil pan in the spring to get the metal shavings out.
We found this problem by pulling the distributer cap and turning the motor over. The distributer wouldn't spin.
#944
Crazy Energy
Platinum Member
iTrader: (4)
Join Date: Aug 2007
Location: Oklahoma God's country no one else wants it.
Posts: 4,334
Likes: 0
Received 1 Like
on
1 Post
We got it fixed. The distributer gear was stripped, so no spark. We think it may not have been installed incorrectly, or the hold down screw could of just come loose. The new motors only had 15 hours on them. Derebery reset the distributer and checked the timing so she is running now. Probobly pull the oil pan in the spring to get the metal shavings out.
We found this problem by pulling the distributer cap and turning the motor over. The distributer wouldn't spin.
We found this problem by pulling the distributer cap and turning the motor over. The distributer wouldn't spin.
#946
Registered
How did you transport the beam? Sucker had to of been the length of the truck. Or not?