Lake Lanier power boaters
#44
Platinum Member
Platinum Member
I started having fuel delivery issues with the starboard motor... that means during the evenings and nights over the past 4 days I've replaced the hoses, the filter, the regulator and had a pump overnighted and I installed it night before last. Turns out its the fuel delivery board in the ECU has decided to become a liberal and not work. Anyone have a lead on a 575sci computer? And it looks like I'm side-lined this weekend, and I'm truly unhappy because I had the boat cleaned and ready for pictures...
#45
Registered
Thread Starter
I started having fuel delivery issues with the starboard motor... that means during the evenings and nights over the past 4 days I've replaced the hoses, the filter, the regulator and had a pump overnighted and I installed it night before last. Turns out its the fuel delivery board in the ECU has decided to become a liberal and not work. Anyone have a lead on a 575sci computer? And it looks like I'm side-lined this weekend, and I'm truly unhappy because I had the boat cleaned and ready for pictures...
#46
Registered
Join Date: Oct 2009
Location: Alpharetta Ga/Oshkosh Wi
Posts: 269
Likes: 0
Received 7 Likes
on
5 Posts
Call RIggs Marine In Eldorado Wis, He can usually get older parts when no one else can. I am not for certain he can help but its worth a try. W9092 Lincoln Rd, Eldorado, WI 54932
(920) 872-2728 ask for Mel Riggs.
(920) 872-2728 ask for Mel Riggs.
#48
Registered
Thread Starter
Everything is ready! Just hope I can snag my favorite spot for burgers in the morning.
See you guys tomorrow at "Cocktail Cove" I'll be there at 12. We leave out at 1pm
See you guys tomorrow at "Cocktail Cove" I'll be there at 12. We leave out at 1pm
#49
Platinum Member
Platinum Member
I found a 575sci computer from a gentleman in Jacksonville that was "new old stock" and unused. I had it sent to Tyler Crockett in MI to reflash with the proper program to run the motor, but unfortunately it won't be back until Thurs or Fri, which means I hope y'all have great time tomorrow (take pictures). (It's too bad that even the Baja is sidelined with the heads off...guess I need another boat) (if I can get THAT past the fiancee, I should write a book)
I hope everyone has a great time, and I'll see you all next month !! I'm looking forward to seeing pictures (perhaps an email list for Lanier fast-boats)
I hope everyone has a great time, and I'll see you all next month !! I'm looking forward to seeing pictures (perhaps an email list for Lanier fast-boats)
#50
Platinum Member
Platinum Member
Thank you for the information. I'm going to pull the existing computer and send it for repairs. I want to keep a spare on hand... never know if something will happen similarly to the port motor in the future...