this is from sanibel


https://cimg1.ibsrv.net/gimg/www.off...dced0068d.jpeg

She's a beauty. Looks fast even while floating still... Really like the clean all-white setup with race fairing in the Fountains.

Safe travels captain!

Thanks bud

New To Cape Coral too! Looking for Race Quality Outboard rigger
 

New To Cape Coral too! Looking for Race Quality Outboard rigger. I have a older Pursuit 2100CC in very clean condition with a newer Yamaha Z200 outboard. The rigging is a little sloppy and showing it' age. I want to find a tech who can update and make it neat like a new boat rigging. Anybody to recommend?

We're Heading down rough winter & times boat looking good so far see all of you guys & gals soon!
https://cimg7.ibsrv.net/gimg/www.off...5a979f626e.jpg
https://cimg3.ibsrv.net/gimg/www.off...9d914f073f.jpg
https://cimg5.ibsrv.net/gimg/www.off...8f3d68fe84.jpg

I have a job opportunity to move to FL (was thinking Cape Coral, the company is actually in Melbourne but can work from anywhere) so have been looking at boat storage options.
Safe Harbor marina has dry stack up to 32' & Everest marina up to 34'. Are there other options that can do 35+ or is personal dock lift the only option?

Ft Meyers has new high dry not sure on prices but heard very nice place

Awesome. Hopefully we get to welcome you soon into the Cape. Depending on how much distance you consider reasonable, and where you want to be from a boating port perspective, also consider Safe Harbour Pineland in Pine Island. As NP353 mentioned, Fort Myers has several very large facilities including Moss Marina and Gulf Star Marina. Snook Bright Marina down in Estero Island seems to also be a nice spot.

Any recommendations to source wood Trailer Vertical Bunks in SW Florida? Well, I'll go anywhere in FL if it makes economic sense. Need two 3" thick x 10' long. 10"-12" tall range would work. Seems big box retail do not carry them and looking online put me at Menard's Mid-Atlantic. Will not have the trailer for long so it does not have to be the "ultimate' quality.

Wazz-up Guyz... I bought a Carver "Performance Poly-Guard" cover for my Formula 271 FASTech last year in June. After a little over a year of use, it seems to have lost most of its impermeability. I processed a replacement through Carver.

I am told one can spray it with some stuff and recondition it but I am not going to mess with it. So if you need a cover and want to pick this up, let me know and we'll work out a local deal. No visible wear, tears or rips. It is still nice and white on the outside but it does have some yellowing and "stain" lines on the underside. six four six six four five four eight five one.

https://cimg8.ibsrv.net/gimg/www.off...ae33fcf753.jpg
https://cimg9.ibsrv.net/gimg/www.off...aa1808e461.jpg