Finished the port side and the cup holders today. Diggin' it! The camera makes the light look white, but to the naked eye, it's all red.

It turned out really good!!!

Looks really clean! What flooring is that and where do I get it?... Blake and I redid our 30 spectre and took it from triple 2.5's to twin 300's.... Also cleaned up the dash a bit and still have some things left to do.

Thanks. The cockpit flooring was done by Marine Mat. The mat that's on the deck is Aquatraction.

I got my amp box cover back from upholstery. He did the black carbon vinyl and a new piece of plexiglass.

Finished wiring up two Boatpluglight Electra lights with Superbrightled 15A remotes. I can run them both with a single controller that has dimming and strobing features. They will probably just stay on solid, though.

Looks great!
Jay

A couple more projects are done. I installed a billet Marine Industries West 12"X5" glove box door with custom black starboard box made by Boat Outfitters. All of the gauge bezels got replaced as well. I had a couple of them that were corroded, but found that the design had changed a little since 2001. Since they all needed to be replaced to match, I went with black.

Been busy doing some maintenance on the trailer and the lower units. The trailer got all new hubs with triple lip seals and Timken bearings. Finally, I installed new wheels and tires so I'm all set for some long trips this year.




Then, the lowers were treated to MadEFI billet drive and shift shaft seal carriers along with new impellers.