F-4 Sighting
#22
#23
It still out runs me though
When are they building one with 850's? Great boats guys.Rich.
Last edited by PWRQWST; 05-10-2007 at 08:54 PM.
#24
Notice the new cockpit covers. I wonder if Wayne did that to keep the paint from chaffing? One thing I would not like is the snaps showing, they stay hidden under the rub rail on the other cover. Plus for me, not towing, the cover that goes over the rub rail works better.
#25
When I ordered my engines the 700s were not available. If they were I would have ordered them just for the drives.
#26
Notice the new cockpit covers. I wonder if Wayne did that to keep the paint from chaffing? One thing I would not like is the snaps showing, they stay hidden under the rub rail on the other cover. Plus for me, not towing, the cover that goes over the rub rail works better.
#27
Saturday we ran with 6 guys that tip the scales to around 1400 lbs, 150 - 175 gallons of fuel, and we could still cruise a little above 70 and leave 800 RPM on the table. So I am running just fine. I am getting more and more comfortable running the boat and knowing exactly where to set everything.
When I ordered my engines the 700s were not available. If they were I would have ordered them just for the drives.
When I ordered my engines the 700s were not available. If they were I would have ordered them just for the drives.
#29
Registered User
Joined: May 2007
Posts: 15
Likes: 0
The black and green factory boat is in Rochester, NY this weekend for a new dealer- Mark's truck and boat center. Wayne and Joel came with it. 700sc's with NXT's- 5 people, full tank- 101mph! Just thought someone might like to know.





