Offshoreonly.com
Page 2 of 4
1
2
3
4
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Sunsation (https://www.offshoreonly.com/forums/sunsation-43/)
-   -   Let The Upgrades Begin!! (https://www.offshoreonly.com/forums/sunsation/180444-let-upgrades-begin.html)

SDFever 03-02-2008 11:48 PM
Originally Posted by live wire (Post 2468440)
Thanks for the info you PM'ed me,I appreciate the help .I will PM you after it has been torn down.

What drive are you running??
Bravo I X. Also decided to install the Latham Drive Shower during Raylar upgrade.

288sunny 03-03-2008 08:54 PM
raylar kit
 
LIve wire, havnt seen you much on sunsation, just wanted to see if you got the kit yet? how are things coming?

live wire 03-03-2008 09:07 PM
Originally Posted by SDFever (Post 2468828)
Bravo I X. Also decided to install the Latham Drive Shower during Raylar upgrade.
I'm running the same drive ,I was a little concerned if it could handle the additional load. My dealer said I should be fine as long to abuse it to much.

How much of an increase did you see top end ,and are you running Hyd steering?

live wire 03-03-2008 09:11 PM
Originally Posted by 288sunny (Post 2470023)
LIve wire, havnt seen you much on sunsation, just wanted to see if you got the kit yet? how are things coming?
I'm been away alot riding the sleds, I've been on the site just havent been postin much. I hoping to get the boat unwrapped and over to Mahopac Marine to pull the motor out by next week but again the snowmobile thing is getting the way

25 hors la loi 03-04-2008 01:33 PM
1 Attachment(s)
Originally Posted by live wire (Post 2470052)
but again the snowmobile thing is getting the way

Yes with the potential storm comming :D....we going to spend lot of time with the snowmobile ...... but please keep us posted of the upgrade and any developement with the 496 and Raylar kit :D

live wire 03-04-2008 03:33 PM
Originally Posted by 25 hors la loi (Post 2470813)

Yes with the potential storm comming :D....we going to spend lot of time with the snowmobile ...... but please keep us posted of the upgrade and any developement with the 496 and Raylar kit :D
GIDDY YUP!

25 hors la loi 03-06-2008 08:12 AM
1 Attachment(s)
Originally Posted by live wire (Post 2470986)
GIDDY YUP!
Giddy up again !!!! , and don`t forget soon you start upgrade keep us posted with picture :D ...after some ride of snowmobiling of course :D .... i go back with my Back Coutry too :evilb:

live wire 04-13-2008 05:56 PM
3 Attachment(s)
An update on the slow progress. The motor was pulled about 2 weeks ago. But due to some shipping issues the motor project has been at a stand still. There has been some progress in the electronics upgrades but also slow. I'm hopeing this is the week everything will start to happen.

SDFever 04-17-2008 12:38 AM
Originally Posted by live wire (Post 2523954)
An update on the slow progress. The motor was pulled about 2 weeks ago. But due to some shipping issues the motor project has been at a stand still. There has been some progress in the electronics upgrades but also slow. I'm hopeing this is the week everything will start to happen.
Shame on you for not having a Snap-On tool box in that picture above!!!!!!!

:hitfan:

live wire 04-17-2008 05:35 AM
Originally Posted by SDFever (Post 2528346)
Shame on you for not having a Snap-On tool box in that picture above!!!!!!!

:hitfan:
If I had only known you were a SNAP-ON rep I would definatley bought SNAP-ON .

Thanks for all the helpful tips and advice yesterday ,and congrats on your the big numbers your gettin.Hopefully I'll be seeing the same results.
Kevin


All times are GMT -5. The time now is 08:14 AM.
Page 2 of 4
1
2
3
4
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.