Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Superboat (https://www.offshoreonly.com/forums/superboat-44/)
-   -   MGD Performance (https://www.offshoreonly.com/forums/superboat/151912-mgd-performance.html)

MDGperformance 03-19-2007 07:15 PM

The tilt unit makes it nice when idling,tilt it up and you can stand up between wheel and seat,most people like to stand up wnen getting close to dock.Hey rick hows it looking for pickup,John was calling interior guy,trailer will be ready tommorrow

Superbabi 03-19-2007 08:04 PM

MDG, Your guages do look awesome in platinum !!!! Did I see 2 gas guages ???

jayhawk261 03-19-2007 08:27 PM


Originally Posted by Superbabi (Post 2063908)
MDG, Your guages do look awesome in platinum !!!! Did I see 2 gas guages ???


Yeah, looks like a fuel level and a fuel pressure. It also has water temp/pressure and oil temp/pressure. Nice setup!!

Pat McPherson 03-20-2007 06:34 AM


Originally Posted by jayhawk261 (Post 2063954)
Yeah, looks like a fuel level and a fuel pressure. It also has water temp/pressure and oil temp/pressure. Nice setup!!

Vary Vary Nice!
I like the individual gauges; oil temp is on my list to add...:cool:
Gary has all of that and more with his smartcraft but switching screens at 80+ must be interesting...:eek:

Superbabi 03-20-2007 02:35 PM

Pat, there is two ways to use the Smartcraft, 1st is to pick your menu page of choice and leave it there, and press up or down for another page while under way ( very hard to do at speed ) 2ond option is auto page ( every 5 seconds another page will display ) For me the smartcraft is a very nice set up.:D

krakmeup 03-20-2007 03:47 PM

1 Attachment(s)
I replaced my trim guage (lower right in photo) with smartcraft single gauge and couldn't be happier - the single guage doesn't have auto page though, that would be nicer. I can leave any one readout active and whenever I hit the trim switch the readout displays trim level and then returns.

MDGperformance 03-20-2007 08:18 PM

Extra gauges fuel psi,water psi and oil temp all important gauges on big hp motors,need to know we are getting plenty of water and fuel when running hard and oil temp staying stable.Going to install custom water pick(no pickup in konrad)need to maintain around 18-25psi at wot,but also create the least amount of drag as possible,thinking about installing a pickup in bottom of hull like used on spectres,skaters,mti.I rigged aset in a 36 spectre running #5 speedmasters and they worked great.need to look at bottom real close before i make final decision.Water pickups that hang down grab alot of water but can lose speed from drag or causing prop slip

TeamSaris 03-21-2007 06:29 AM

Very sweet Setup :cool:

FX10 03-22-2007 04:07 PM

Dave.
A few more things to do. The upholstry is in. Looks Awesome. Your the first one with the new bucket seats. Cabin isw completely done. Cabin door is installed. Just alittle detailing to go. Plus putting in the upholstery. I'll have pictures up tonoght, around 8:00.

Rick

FX10 03-22-2007 05:00 PM

3 Attachment(s)
Dave,
I'm 2 hours early with the pics. Hope your not upset. ;) And I hope you have your Pop Corn Ready !!


All times are GMT -5. The time now is 10:17 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.