|
The mold for the forward hatch / Trunk was finished last friday. Now comes the wetsanding, compounding and waxing. Hopefull it will be ready by the end of next week.
|
Originally Posted by FX10
(Post 2414079)
Now comes the wetsanding, compounding and waxing..
|
2 Attachment(s)
Here are the pics of the forward hatch / trunk mold. Its a 3 piece mold.
|
Very nice Rick, keep up the good work !!! ha ha lol lol !!!:D
|
3 Attachment(s)
Finisher making the mold for the Forward hatch / trunk. Pulled the plug out of it yesturday. And spendt the day wetsanding, compounding and waxing it. It will be ready for production next week.
|
1 Attachment(s)
I've been searching the internet for days looking for a large deck hatch for this boat. No luck. So we decided to make our own. It's going to be 5.5' X 2'. It's also going to be used in the 24 CC's.
Here is a pic if the hatch flange plug in the starting stages. |
Rick, all the photos look great, can't wait to see this Y2K CC all together and running !!!!
|
Originally Posted by FX10
(Post 2420050)
I've been searching the internet for days looking for a large deck hatch for this boat. No luck. So we decided to make our own. It's going to be 5.5' X 2'. It's also going to be used in the 24 CC's.
Here is a pic if the hatch flange plug in the starting stages. |
When will the first 30 be done ?
|
Originally Posted by Ed
(Post 2423138)
Will the standard fuel tank fit through this hatch?
The fuel tank is an integral part of the hull. It is foamed and glassed in place, between two bulkheads. It is not meant to be removed. The deck hatch is for the forward floor in front of the console. |
| All times are GMT -5. The time now is 03:37 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.