Y2K Center Console build pics !!
10-13-2007, 04:45 PM
#71
VIP Member
VIP Member
Great idea Rick!!!
__________________
Gary H...
Gary H...
Platinum Member
10-17-2007, 04:20 PM
#75
Registered
Thread Starter
Here are some pictures from today. As you can see the forward "Trunk" section was removed. Now the drip rail has to be molded into the deck. Then another one on the trunk. Alot of work, but as you can see. It's going to be worth it. The bow are will have compartments for bumpers, life jackets, anchors and lines, fire extinguishers and first aid kit.
These pictures show before the removal.
These pictures show before the removal.
10-17-2007, 04:24 PM
#76
Registered
Thread Starter
And here are the pictures of the "Trunk" after it was removed from the deck. It also shows how it will hinge with help from 2 gas lifts.
The picture of the bow area has wood in it. That wood is only for support to make the plug. The bow area will have compartments. Pretty cool, huh ?
The picture of the bow area has wood in it. That wood is only for support to make the plug. The bow area will have compartments. Pretty cool, huh ?
Last edited by FX10; 10-18-2007 at 02:42 PM.
Gold Member
10-21-2007, 11:21 AM
#79
Registered
Thread Starter
Well, I finally got the deck all primed. Next week comes the sanding and finishing ther drip rails for the forward "Trunk". I'll have pictures on monday after work.
10-24-2007, 09:06 PM
#80
VIP Member
VIP Member
Rick any updates on the CC Y2K project?
__________________
Gary H...
Gary H...
