Twin Y2K?
 

Is there any pics of the twin boat out there.
What are the numbers John said it ran 80

I think there is an old thread somewhere with pics.
It had twin Merc 6.2L small blocks shoe horned in with Bravo drives.

I did a search back to 2005 and can't find it.
I'm sure FX-10 has pics.

Thanks I have a customer that was wondering.
Anything to sell another Suprerboat.
Way toomany Scarabs here!

damn pat, you're getting lazy... only back to '05?...:rolleyes: ;)

http://www.offshoreonly.com/forums/s...highlight=TWIN

http://www.offshoreonly.com/forums/s...highlight=TWIN

Nice work storm...

Very nice, and with Whipples I can see it making an affordable
rocket . :D

Forget the side by side, Full Staggered !!!!

:ernaehrung004:I hear ya.
How do you like yours with 600 ??

anybody with the new 700/ace?

[QUOTE=pi75;2292397
anybody with the new 700/ace?[/QUOTE]

Superbabi will give you all the info you need next spring!!:D

Thanks Storm, you saved me from going through countless CD's trying to find the pics. From what I heard. It goes 84 MPH.

A pair of 383s w/ bravo's from BAM are like 10-11k a set... $22k total. Not too bad.
http://www.offshoreonlyclassifieds.c...o11937-en.html

http://www.mercruiserparts.com/383_Magnum.htm

Rick, how was the balance w/ twins?
Also, w/ the new hull, and those 383s (325hp@shaft/390tq) you could probably hit upper 80s w/ no drive failures whatsoever.

pi75, I like the 600sci in so far as its Merc Racing, Great Motor no real problems in 270 hours ( 3 seasons ) However 82-84 mph just aint cutting it anymore. I NEED MORE POWER.....................Faster is always better !!!!!:D

Superbabi, I finaly finished work. Since i got on this site I have been falling behind with everybodys boat.:hitfan:
So the 700 is your next choice?

Superbabi II will have a lot more than 700...:D

We have talked about this at length with Rick. It would take a lot of custom work on his part. Maybe after the new 30' CC?
I agree, that staggering the engines would be great if you can retain the back seat...

pi75 I really like the 700sci/NXT PKG. But, the 700 in my hull is not gonna push her into the 90's.

What do you guys think of a Y2K twin 383's/325 HP with a pair of Arensons Surface Drives ???

you should be breaking 90 w/ that combo.
not too far from there w/ bravos too.

What about a pair of whipples on top of the 383's ???

Two of these in a full stagger would make for a wild ride!
http://raylarengine.com/550_engine.html

1100 HP in a Y2K, with a pair of Surface Drives , how fast ???:D

those are 25k a pop. + 15k per side for asd?
113mph.

but i kinda like those 383/bravo packages from BAM.
2 for about the same price as a 525/xr.

Worth every dollar, for a 113 mph Y2K !!!!

Come on Rick, No Comments?
You do need another custom boat project, right?:rolleyes:

I can see it now, the build of SuperBabi II. Twin 500HP small blocks with Arenson drives...:cool-smiley-027:

BS'n about this might just get us through the winter...:D

Hey G,
I know you're a Merc Guy, but this is the small block of the future.
http://www.gm.com/explore/technology...LY6_Marine.pdf
Merc has yet to start using these but others such as Crusader and Marine power are. I've seen them in a number of high performance ski boats...
http://www.pleasurecraft.com/
http://www.pcmengines.com/60.html

but is there any love between fx10 and rik/asd?:hitfan:

If you build it they will come:D

Those are nice. 385 hp & 400 ft-lbs of torque. :ernaehrung004: And they only weigh 540 lbs. :cool: Plus they'll turn between 5500 & 6000. Oh yeah, and they run on regular unleaded.

Full stagger BB /ASD loose the back seat and put the kids
up front for a Bad ass family boat

http://www.sunsationboats.com/mod288ob.htm

Pat yes I do like Merc. ( I grew up with every thing merc ), However if there is a new Y2K in my future, I will not rule out any other product on the market with a Proven Track Record. As long as I can get the motor/drive serviced at the shop I use. ( Warranty Work ). Hey Rick, as Pat said any imput on this set up ???? :D

I'll give you the staggered BB/ADS, but no mid cabin stuff, and there's no way my kids are riding if the front of any rig that goes over 40...:p

http://www.pcmengines.com/NewFiles/Z...ec%20Sheet.PDF
Hey G,
I'm quite sure that these engines are service all over the country; they are optional power on just about any inboard ski boat.
What I'm not sure of is if 2 of these hooked to ADS drives would give you enough to push a 30' Super over 100.
If you have a shop that does all your service and will continue to do so, you probably ask them what/whose custom power they can do warranty work on.
I’m talking small blocks because I think Rick can make them fit in a short stagger without loosing the back seat.

Pat, just think of the ROOSTER TAIL following the Y2K with twin ASD 's !!!!!!

PCM lists them at 930lbs with a trany.
Coupled to an ADS they are going to be less than I/Os.
Maybe you don't need to stagger them...:cool:

Here's my thread from a while ago...
http://www.offshoreonly.com/forums/s...d.php?t=147629

Mine from today...
http://www.offshoreonly.com/forums/s...d.php?t=170327

Anyone know how the one that is currently out there is doing?
The customer happy?
Willing to sell? :drool: buy used and whipple! :D

Never heard anything from the onwer, Rick ???

The owner is very happy. Saw him at the Patchouge Race. Says the boat is running 84. I don't think he's selling it though.