Nose cone report
#1
Thread Starter
Registered

Joined: Oct 2000
Posts: 3,045
Likes: 3
From: N. NJ, Eastern LI
Added a nose cone 2 weeks ago and finally got out to test to day.
Picked up 3 mph!! Finally Broke 90!
I had the race hatch on and hit the Husdon with Hot Boat as my driver. We first tried my 30 B1 that had been cupped, diffuser ring cut off, and diameter reduced, I know....lots of work. Hit 89.8 @ 5900 rpm. Then we tried a 29 Hydromotive that had been labbed and slightly cupped and hit 90.2 @ 5500 rpm.
This boat is an absolute animal!!!!!! The River was rough, 2-3' with a few bigger + boat wakes. We ran through it with ease!!!!! We got into some bigger stuff and was a total thrill at 75 mph!!
Can't wait till next yr.!!!
Picked up 3 mph!! Finally Broke 90!

I had the race hatch on and hit the Husdon with Hot Boat as my driver. We first tried my 30 B1 that had been cupped, diffuser ring cut off, and diameter reduced, I know....lots of work. Hit 89.8 @ 5900 rpm. Then we tried a 29 Hydromotive that had been labbed and slightly cupped and hit 90.2 @ 5500 rpm.
This boat is an absolute animal!!!!!! The River was rough, 2-3' with a few bigger + boat wakes. We ran through it with ease!!!!! We got into some bigger stuff and was a total thrill at 75 mph!!
Can't wait till next yr.!!!
#2
Added a nose cone 2 weeks ago and finally got out to test to day.
Picked up 3 mph!! Finally Broke 90!
I had the race hatch on and hit the Husdon with Hot Boat as my driver. We first tried my 30 B1 that had been cupped, diffuser ring cut off, and diameter reduced, I know....lots of work. Hit 89.8 @ 5900 rpm. Then we tried a 29 Hydromotive that had been labbed and slightly cupped and hit 90.2 @ 5500 rpm.
This boat is an absolute animal!!!!!! The River was rough, 2-3' with a few bigger + boat wakes. We ran through it with ease!!!!! We got into some bigger stuff and was a total thrill at 75 mph!!
Can't wait till next yr.!!!
Picked up 3 mph!! Finally Broke 90!

I had the race hatch on and hit the Husdon with Hot Boat as my driver. We first tried my 30 B1 that had been cupped, diffuser ring cut off, and diameter reduced, I know....lots of work. Hit 89.8 @ 5900 rpm. Then we tried a 29 Hydromotive that had been labbed and slightly cupped and hit 90.2 @ 5500 rpm.
This boat is an absolute animal!!!!!! The River was rough, 2-3' with a few bigger + boat wakes. We ran through it with ease!!!!! We got into some bigger stuff and was a total thrill at 75 mph!!
Can't wait till next yr.!!!





