Definitely lookin' somethin' awesome Sean!

Keep us posted with the splash date...I wanna hear those outboards sing!






noli

This just in.....

....

Cool.

It looks like Rick has put on the fuel cap and starting the base for the seat?




noli

Correction- Rick has almost ffinished the base for the seat

I have to say, yesturday was a pretty productive day. Noli, Coen put the fuel fill in. Bob did the railing and installed the rod holders. I was the base boy all day. Plus I skinned out the throttle pod after it was gelcoated.
Going in around 9:00 to get the base layed up and put a few layers on the shifter pod.

Again alot of custom parts being made. Nice job !! I like the console platform how will it go into the boat ? Dont see any flanges on the bottom. I would glass it down to the floor then gelcoat it along with the floor so it looks like part of the floor. Good or bad just a thought.

Sean, came across these for when you want your kid out of the sun or even take the family camping aboard your boat.






noli

Noli- thanks and good timing, I met with the canvas guy today actually, and we discssed something like you show in that first pic

Thanks...not sure how it will be mounted to the bottom, gonna ask Rick that tomorrow, maybe glass it to the floor from the inside, then a little gel coat around the outer edge to blend it in? The base really gives you some extra room as well, so the batteries will fit nicely in there, we are also putting a bulkhead in the console to mount the trim pumps, so we are gettig that weight out of the back

I also have pics of the seats, just need to upload them tonight off the camera.