The new boat....a 30 CC
#641
#643
#644
Thread Starter
Registered
Joined: Sep 2007
Posts: 706
Likes: 0
The seat is going to be moved back about 1-2 inches, it is only screwed down with two screws right now, will give me more room for throttle at idle and a little more room to stretch the legs
#646
Registered

Joined: Jan 2008
Posts: 5,221
Likes: 620
From: Jersey Shore
...another option would be to just return the current Livorsi controls and exchange for the new short throw controls...
http://mercuryracing.com/1300/control/
http://mercuryracing.com/1300/control/
#647
Registered

Joined: Jan 2008
Posts: 5,221
Likes: 620
From: Jersey Shore
...a third option would be to adjust the seats themselves.
Bring back to upholstery guys and shave off a small section of the stbd and port seats. This would mean doing the following:
1. remove the upholstery
2. cut the fiberglass seats
3. return upholstery following the new contours of the seats
look at the black line in the pic...
Bring back to upholstery guys and shave off a small section of the stbd and port seats. This would mean doing the following:
1. remove the upholstery
2. cut the fiberglass seats
3. return upholstery following the new contours of the seats
look at the black line in the pic...
Last edited by noli; 03-14-2010 at 11:46 AM. Reason: n/a
#648
Thread Starter
Registered
Joined: Sep 2007
Posts: 706
Likes: 0
All definitly options, but moving it back the two inches probably the easiest (JX and Rick didnt 'lock it down' for that exact reason). Moving console forward would mean drilling a bunch of new holes which I would prefer not to do
Moving them back will also work well because the way JC/Rick set it up, your hand lays nice and easy on the side of the seat and you can throttle without wearing out your arm
Noli- did you get that throttle for the 34'? That looks like a nice piece
Moving them back will also work well because the way JC/Rick set it up, your hand lays nice and easy on the side of the seat and you can throttle without wearing out your arm
Noli- did you get that throttle for the 34'? That looks like a nice piece
#650
Thread Starter
Registered
Joined: Sep 2007
Posts: 706
Likes: 0



