surface drive
#1
Registered
Thread Starter
Join Date: Sep 2002
Location: babylon ny
Posts: 364
Likes: 0
Received 0 Likes
on
0 Posts
surface drive
hey mike,
i couldnt post the pic in there so posting here, sorry guys not a superboat, my back up toy, its got a ford 5.8fi with a volvo duo prop, runs low 70s,and is ready for repowering, perfect canditate for a arneson with a small block blower motor!
i couldnt post the pic in there so posting here, sorry guys not a superboat, my back up toy, its got a ford 5.8fi with a volvo duo prop, runs low 70s,and is ready for repowering, perfect canditate for a arneson with a small block blower motor!
#5
Registered
Thread Starter
Join Date: Sep 2002
Location: babylon ny
Posts: 364
Likes: 0
Received 0 Likes
on
0 Posts
Re: surface drive
yes dave i have seen that donzi , its pretty awsome, the guy drives it hard too!. i would lov to try something like that with this u19 , its a great hull very strong and light, its said to be the last mold arnow built before his death,was only made for 2 years 96 and 97 by fourwinns 24deg deep v put improved strakes over 18 ft donzi , i gave up trying to make the ford 5.8 stronger its too hard and expensive to find marine hp stuff for the ford.
#7
Registered
Re: surface drive
jcap i have a arneson package i would like to sell. it's a ads #6 will sell drive, prop and trim cly / pump . also have rear motor mount,bellhousing w/starter,bw trans complete for sb chevy. it's in great condition never had a problem with it. it has on a 19' donzi style boat with 24 degree bottom. call me if interested 616-682-0433 7:00a - 5:30 p
thanks todd
thanks todd
#8
VIP Member
VIP Member
Re: surface drive
Hey Jcap,
Are we going to see you and crazy George running side by side at 90+ in 3 footers next year?
I had a 1975 18' Donzi with a small block and Volvo 280. I loved that boat! I took it everywhere, Block, Greenport, South Hampton...
After a while, no one would ride with me though.
Are we going to see you and crazy George running side by side at 90+ in 3 footers next year?
I had a 1975 18' Donzi with a small block and Volvo 280. I loved that boat! I took it everywhere, Block, Greenport, South Hampton...
After a while, no one would ride with me though.
__________________
Patrick
Patrick
#9
VIP Member
VIP Member
Re: surface drive
Jcap,
I think that Volvo drive you have can handle quite a bit more power.
I know that big blocks got hooked to them.
You could use the drive you have and bolt up a sb chevy blower motor to it.
I have a friend than has the newer style bell housing, flywheel, and coupler from his recent re-power. He just put a late model 350 Volvo in his 18' Donzi.
We'll talk Saturday...
I think that Volvo drive you have can handle quite a bit more power.
I know that big blocks got hooked to them.
You could use the drive you have and bolt up a sb chevy blower motor to it.
I have a friend than has the newer style bell housing, flywheel, and coupler from his recent re-power. He just put a late model 350 Volvo in his 18' Donzi.
We'll talk Saturday...
__________________
Patrick
Patrick