Tom is your boat close enough you can do a few measurements for me?

I'm lookin at it as I type! My baby is 25' from my officina!

I need to know how much you got from the oil pan seal to the hull ( oil pan clearance) and how much you have from top of block to hatch scoop ( will the blower fit). Thankx buddy

Well not officially gonna be in the Heat Wave Poker Run in Havasu at the end of the month. Rob, if your gonna be on the water, I'll be staying at Havasu Springs. When day breaks I will be in front of Black Meadows to watch the 150mph freaks fly by. Then head towards the bridge to hange out.

We are doing the same, no run but on the water... From what I under stand they are gonna let the guys hit it as soon as they clear the buoys in Thompson Bay so we might watch from the copper canyon area. I think we are going to be in my brothers Elim. 28' but not sure yet. I'll get a hold of you when we get a little closer and we can figure out where to watch from.

Cool! There gonna be an ealry morning party in front of Black Meadows. Maybe 50 or more boats.

Well, I got out to try the labbed 30! Not what I expected. 5300 rpm and low 80's! Something must be wrong with this prop. I seen much better with stock props. No wonder this buy sold it on Ebay. Labbed by BBlades I'm sure because of the box it came in. Oh well back to the stock Bravo's or Hydro's.

Bummer!!!!

What ya guys think?

Ready for TAKE OFF !!!!!! Very nice.