Anyone have the specs for the rum runner hulls? Weight, draft, width, etc?

Weight with a Single BBC? Would it sit higher in the water than a twin small block Rum Runner?

I got about 3 - 3.5 feet of water where I can dock one.

sometimes i sit in .5-1.5 and have to walk the freakin' thing out to 3 feet...

What!?! .5-1.5? It floats in that little water? Or is it sitting on the bottom? I'm looking at picking up a single I/O Rum Runner BBC / TRS setup so I should be ok with the 3 feet to float.

The listed weight for an I/O hull is 4000 lbs... is that with engine and outdrive in place? I only ask because the O/B hull listed weight is 2800 lbs... so that has to be minus power. I highly doubt an unrigged I/O hull is going to be 1200 lbs heavier.

the mud is really freakin' soft and I've disturbed a clam or two...3 feet would be a little slice of heaven for me....i figure, all told, I weigh in at 6000, boat, motors, fuel, trailer, gear, etc...a single 26 with the TRS set-up is going to be great...you should be very happy with the whole thing...

Which 26 single trs boat is it? Richie didn't build many at all.