Go Back  Offshoreonly.com > Offshoreonly Marketplace > Swap Shop
Borg warner 71C transmissions .. >

Borg warner 71C transmissions ..

Notices

Borg warner 71C transmissions ..

Thread Tools
 
Old 01-25-2009 | 06:32 AM
  #11  
Biggus's Avatar
Registered
20 Year Member
 
Joined: Apr 2001
Posts: 6,305
Likes: 36
From: Naples, Maine
Default

Originally Posted by daredevil
Hey ,,,fullforce,,,,dont let them tell you they will not fit.

A c71 or 72 is the same housing ,,,,,on your pic there is no tailstock on it ,,so what ever tailstock u bolt on there it will fit.

They even take a #6 tailstock unless the tranny's are for driveshaft then they will not take any tailstock.

Can u post a picture of the back side of that tranny ?????

They are not the same housing. The 71C is 15/16" shorter than the 72C.

-Kurt
Biggus is offline  
Reply
Old 01-25-2009 | 07:29 AM
  #12  
Full Force's Avatar
Thread Starter
Gold Member
20 Year Member
Gold Member
 
Joined: Oct 2005
Posts: 11,692
Likes: 217
From: Olmsted Falls,Ohio Marblehead,Oh
Default

Originally Posted by Biggus
They are not the same housing. The 71C is 15/16" shorter than the 72C.

-Kurt
That part I was aware of, the guy that bought one of these had a 71c ini his cruiser, apparently they are dififerent housiings, same guts, it has been a huge ordeal and he wants his money back... I am working with the guy since I am not a dik. there was never anything said in the sale about a gaurantee to fit or money back, he is lucky Ii am a nice guy, he claiimed through paypal Ii sent the wrong thiing but since it was shuipped and it was a 71C still they denied to deal with it.
Good thing I am a honest person, I could go tell him to pound salt at this point.
Full Force is offline  
Reply
Old 01-25-2009 | 08:06 AM
  #13  
Biggus's Avatar
Registered
20 Year Member
 
Joined: Apr 2001
Posts: 6,305
Likes: 36
From: Naples, Maine
Default

If the cruiser was an inboard, the trans would have a flange output. Yes the cases are different for flange and plug-in (tail stocks)
Biggus is offline  
Reply
Old 01-25-2009 | 08:11 AM
  #14  
Banned
 
Joined: Oct 2006
Posts: 5,844
Likes: 0
From: Bradenton Florida
Default

Originally Posted by Biggus
They are not the same housing. The 71C is 15/16" shorter than the 72C.

-Kurt
Thanks Kurt,,i did not know that . SORRY i tought they just had 1 less clutchplate ??????

I did know that the driveline and plug in is diffrent.

But then again 15/16 is not that much ,,is it ,,,,,it would still work ?????? or no ?????
DareDevil is offline  
Reply
Old 01-25-2009 | 08:14 AM
  #15  
Full Force's Avatar
Thread Starter
Gold Member
20 Year Member
Gold Member
 
Joined: Oct 2005
Posts: 11,692
Likes: 217
From: Olmsted Falls,Ohio Marblehead,Oh
Default

Originally Posted by Biggus
If the cruiser was an inboard, the trans would have a flange output. Yes the cases are different for flange and plug-in (tail stocks)
Yea... Ii know that now, the part that bugs me is I lisited iti for what it was with a pic, it did not fiti his application and now says iti is my fault he didi not know what he needed, apparently it was my job to know his application..
Full Force is offline  
Reply
Old 01-25-2009 | 08:24 AM
  #16  
Biggus's Avatar
Registered
20 Year Member
 
Joined: Apr 2001
Posts: 6,305
Likes: 36
From: Naples, Maine
Default

Originally Posted by Full Force
Yea... Ii know that now, the part that bugs me is I lisited iti for what it was with a pic, it did not fiti his application and now says iti is my fault he didi not know what he needed, apparently it was my job to know his application..
I hear ya, the guy bought the wrong parts for the job.
Biggus is offline  
Reply
Old 01-25-2009 | 08:32 AM
  #17  
Full Force's Avatar
Thread Starter
Gold Member
20 Year Member
Gold Member
 
Joined: Oct 2005
Posts: 11,692
Likes: 217
From: Olmsted Falls,Ohio Marblehead,Oh
Default

Originally Posted by Biggus
I hear ya, the guy bought the wrong parts for the job.
Yea, nad says it's my fault!
Full Force is offline  
Reply
Old 01-25-2009 | 03:42 PM
  #18  
Cig35Mistress's Avatar
Registered
20 Year Member
 
Joined: Jun 2004
Posts: 761
Likes: 1
From: Palm City, Florida
Default

Not to hijack this thread . . . but for those who might need:

One pair of Borg Warner Velvet Drive 1:1 72C transmissions, for TRS applications. They were sold to me as new old stock by a friend who had a boat building business. They were on his shelves for years, and now they are on mine.

I also have another pair of 72C's, that are good used takeouts, and include the hard to find TRS tailstocks. They came out of my 35' Cigarette Mistress, which wound up being sold as an unfinished project.

I'd like to unload both pairs, I'm asking $750 each unit or $1200 for each pair. They are located in South Florida

E-mail me at [email protected] if you're interested and I can send you pics.

Thanks,

Harry
Cig35Mistress is offline  
Reply
Old 03-17-2009 | 06:53 PM
  #19  
Full Force's Avatar
Thread Starter
Gold Member
20 Year Member
Gold Member
 
Joined: Oct 2005
Posts: 11,692
Likes: 217
From: Olmsted Falls,Ohio Marblehead,Oh
Default

Still have these....
Full Force is offline  
Reply
Old 06-10-2009 | 08:40 PM
  #20  
Full Force's Avatar
Thread Starter
Gold Member
20 Year Member
Gold Member
 
Joined: Oct 2005
Posts: 11,692
Likes: 217
From: Olmsted Falls,Ohio Marblehead,Oh
Default

Still sittin here..
Full Force is offline  
Reply


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.