A local guy that has been doing prop work for many years. While he's not as well known, he certainly understood what I was trying to achieve and got me there. I bought the 30 MAX from someone who couldn't spin them then cut them down some without success, so they had little use. Since we had the data from the 28 MAX and the 32 Bravos, he was able to hit what I needed from the 30 MAX the first time he touched them.

The 32's were props I already had but I wanted to make them a good "cruising" set (I already had a set of 30's that would be top end props but later found out they had cracks in them). He worked on them a little...but they didn't work like I wanted. After some minor adjustments, they were GREAT!!! These things cruise right about the same rpm/speed as the 28 MAX I have and run almost the same WOT but at only 5,000 rpm's instead of 5,300. I'm afraid to mess with them anymore.
56-58 at 3,500 and 81-83 at WOT for all 3 sets (28 MAX, 30 MAX, and 32+ Bravos)...labbed 30 Bravos gopt me 85-almost 86.


BTW: You asked about the Bravos, but I'm not looking to get rid of them.

Ttt

Still available.......

I got a pair of labbed 32 bravo's (bblades) that
turn a little fast for my boat. I'll trade you for those
32/33's you have.

I've been out of town (FL) and just saw this post. I'm thinking this might work since I already have my "cruising" props.......

check PM's

bring all of your sets when you come up in may i'd like to try a set, have you tried a set of Herring's?

Will, call me. You have extension boxes right? What props are you running now?
8O4-9I4-2628

Will you sell them sperate? [email protected]