Hoping someone upgraded, or changed their setup. Looking for an Edelbrock Performer RPM Air Gap intake. Rectangle port..BBC. Thanks !!! (716) 807-4561..Jim

I have been watching ebay for the same intake but in an oval port. I have seen many rec port intakes on there so maybe you can find a deal on there.
Erik

The air gap isnt real popular manifold with marine applications. Most step up to the Victor series.

I have one here if you are interested (square port)

http://www.offshoreonly.com/forums/s...ut-garage.html

I have these two if interested ?
Thanks B

http://www.performanceboats.com/html...ad.php?t=30215

Well...my 26' Chris-Craft Limited is kinda heavy. I've done quite a bit of research, and talked to alot of shops...they all recommend the Air Gap. The Victor seems to be for boats that are lighter. I'm gonna cross my fingers, and hope I find one. Thanks for the offers tho.

Iam in the same boat as you..get it. Anyway I think the airgap will be a better intake anyway thats why iam looking for one but for a oval port head, better off idle torque then those single plane intakes.
Erik

Ebay has a few, this one's polished:

http://cgi.ebay.com/ebaymotors/BBC-B...1%7C240%3A1318

Good luck!