More Stuff from the Garage!
 

Time to get rid of all the extra parts lying around. I have alot of parts from several projects that are taking up too much space and tying up too much cash. I will get pics posted tomorrow of most of it. Any interests please let me know before it all goes on ebay. All this stuff is fresh water used. All in good useable condition. NO JUNK! All items are plus shipping or you can pick it up in Philadelphia, PA. 19136

1. 2- B&M 250 marine blowers complete from intakes to air cleaners, dual carbs on each. $2500, each.OBO
3. 1- KPM strainer, will handle 2 engines. $400.
4. 1- Merc. trim pump work fine with mounts. new motors good reservoir. $150.
5. 1- Bravo 1 hub for STD 1" shaft, solid HP. $50.
6. 2- Marine machine, Bravo 1 wing plates SS for twins $400. for the pairOBO
7. 2- MSD Boost Timing Master modules $100. Each
10. 2- Drive temp parts. thru hulls and gauges, needs senders and wires. $75. for the pair.
11. 2- Crane Cams BBC stud girdle set ups. Used but great condition. With locks $125.ea.
12.SOLD 2- Merlin "X" Intake manifolds New for Dominator carbs I has dyno time only $350.ea.
13. 1- Mercruiser factory remote oil filter set up w/ hoses and bracket. $75.
14. 1- Latham Bravo tie bar saddle, New. $50.
15. 2- Bravo/Alpha transom inner plates. New, $75. ea.
17. 1- 468 cu.in. BBC short block. Aprox 40 hours. Forged internals, 8.5:1 comp with oil pan flywheel and balancer. No cam. $1500.
20. 2- Polished Dominator throttle cable brackets. New. With clips, $30. each.
23. 2- Prop Socs for a pair of 3 blade props. $20. for the pair.
24.SOLD Livorsi GPS 120mph Speedo setup complete with 3 3/8" speedo, antenna and recall switch. Antenna new last season. All white, $350.

Pics from the Garage!
 

More pics coming!

More Pics!
 

Here they are!

PM sent for Oil Press Guages

I need the strainer.9. 1- Livorsi Sea strainer, NEW, red top. $250 PLEASE CONTACT ME FOR ARRANGEMENTS,Thanks ,Bob

Will those MSD boxes work with TB 1V ignitions ? I am looking for a little extra spark for my stock set up.
Thanks,
John

Hey John, I''m not sure if they are what you need. Take a look on MSD site and maybe you can get the right information you need on them. I think they are for timing adjustments but I'm not really sure. Let me know what you find out.

pm sent.

got any pics of the stud girdles ?

468 Bbc
 

What generation is the block? Does it need work? Why is the cam out of it? I'm in Northern Maryland. Thanks