I am removing the 557's from my 36 Eliminator and moving everything but the Quad Rotor Whipples. These motors are built with all the best parts...Lunati, Crower, Comp, Dart 355 CNC aluminum heads, etc. I can raise the comp to 9:1 and put a single Dominator on for over 700hp or a single 3.3 or 4 liter Efi Whipple with 8:1 for 800 - 1100hp. My boat is running over 150mph flawlessly with these ... can hear run. Engines have about 55hrs and need nothing....may have 1 sold...not sure yet....carb version starting around $7500

Pm Sent

I also have 2 540's carb to pan less ignition and accessories. They are built on Bowtie std deck blocks with 4340 4.25" cranks, H-beam rods, 10 qt pans, 335 CNC Dart alum. heads, Hyd. roller, polished 3.3 whipples, dominator carbs....49hours and run perfect. Dynoed 923hp on pump gas...will seperate.. asking 11k each

any pics email to [email protected]

Do you have some pics of both versions on engines? If so please email to [email protected].

Tom

The 557's can be seen in the pics of my eliminator on my website... www.htgracing.com ... however that does'nt do much good as the quad rotors don't go with them...the 540's have polished 3.3 whipples with a carb and blue 500hp valve covers. SORRY ..but I send so many pics to tire kickers who never respond....all my engines I sell are good and we can give any look desired with different valve covers, paint etc.
1 557 short block is sold ...have 1 left or 2 sets of heads,cams etc. I may keep the other for a spare.
Please call if interested
716-773-6131.....Rob
716-418-6131....cell...leave message