4.3L or sbc wanted
#1
Thread Starter
Registered
Joined: Jun 2010
Posts: 113
Likes: 0
From: Scottsdale, AZ
For my friends boat. She has a 4.3L and a volvo jet. Need a new 4.3L long block. I think an SBC would bolt right up as well if any one has one complete with exhaust. Any advice on going to an sbc would be helpfull. I think it would drop right in, I could be wrong.
#2
the sbc is going to be a little longer and wider i have a complete ( minus carb, wiring, exhaust and ignition ) 4.3 that needs a block ( it has water in the oil and i think it has a cracked block )
__________________
www.bajaboatowners.com
www.bajaboatowners.com
#4
Registered
Joined: Aug 2005
Posts: 6,306
Likes: 1
From: Between A Womans Leggs in IL
Sbc and a 4.3 is the same width,sbc is about 8'' longer and all the rest of the assories will bolt up except for the flywheel exhaust manifolds and the water pump but if its a jet i t wouldn't need a water pump..
#6
Got a turn key drop in and go,350 mpi motor LOW HOURS,like new.3500.00 plus freight.Mail me if [email protected] Thanks JOHN SR



