Go Back  Offshoreonly.com > Offshoreonly Marketplace > Swap Shop
-2 IMCO lowers and XR upper >

-2 IMCO lowers and XR upper

Notices

-2 IMCO lowers and XR upper

Thread Tools
 
Old 10-11-2011 | 12:36 AM
  #1  
Thread Starter
Registered
 
Joined: Jun 2006
Posts: 14,914
Likes: 1
From: Lake Conroe, TX.
Default -2 IMCO lowers and XR upper

Found a deal on a stock set of XR's for my boat. I don;t need the shorties for what I am doing these days.

Both lowers have less than 40 reported hours on them, but they are approx 4 years old. Came with the boat. I have put 25 hours on them with 525 HP engines.

There are 2" spacers in the set up right now.

One of the XR uppers is fine. The other upper is broken, but not sure now bad yet. Assume the worst. Drive is picled with diesel fuel right now as the cause of the damage was due to bolts backing out of top cap and allowing gears to slip.

Looking for offers so I can decide if I can go back with the stock drives I found or not. I knwo these shorties are worth a little more than a regular lower. They are polishable, but they are pretty rough as they have not been polished in years.

Just testing the waters.

Come with the showers as well.

I am wanting to replace everything on the back to go with all the new stuff under the hood if I can get some money out of these.

I'll try to find a pic. You know weather you want them or are interested or not, please no photo collectors. Serious people only.

Send PM's as needed.

Thanks
jeff1000man is offline  
Reply
Old 10-11-2011 | 07:07 AM
  #2  
tcwcar's Avatar
Joe
 
Joined: Aug 2010
Posts: 702
Likes: 2
From: SE Pennsylvania
Default

Pm sent
tcwcar is offline  
Reply
Old 10-11-2011 | 08:22 AM
  #3  
Thread Starter
Registered
 
Joined: Jun 2006
Posts: 14,914
Likes: 1
From: Lake Conroe, TX.
Default

The marina up here in NY is tearing down the broken drive today to see what is broken in there. It didn't grenade, But I want pople to know what is going on in there.

I got your PM, and I want to talk more once I can giv you a realistic idea of what is going on in there.

Thanks for the interest.

I need to keep the spacers though. Forgot to mention this earlier. I had them committed all ready and forgot about this.
jeff1000man is offline  
Reply
Old 10-12-2011 | 04:02 PM
  #4  
Thread Starter
Registered
 
Joined: Jun 2006
Posts: 14,914
Likes: 1
From: Lake Conroe, TX.
Default

Pulling thses for right now. Update later
jeff1000man is offline  
Reply
Old 10-12-2011 | 05:21 PM
  #5  
Registered
 
Joined: Jul 2011
Posts: 821
Likes: 0
From: mirabel,qc
Default

interested too
pqjack is offline  
Reply
Old 10-12-2011 | 05:26 PM
  #6  
Thread Starter
Registered
 
Joined: Jun 2006
Posts: 14,914
Likes: 1
From: Lake Conroe, TX.
Default

I will only sell everything together if they go. PM offers for the whole enchilada.

Thanks Jeff
jeff1000man is offline  
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.