Parting out 2 420 Mercs
#1
Parting out 2 420 Mercs
I needs some parts of these engines. I took what I needed and now just selling off the rest of what is left. If some one is looking for something it may have it. One engine sucked water other came out as a runner from what i was told.
-Mike
-Mike
#2
Registered
I need an oil filter head mount bracket with adaptor that the filter spins onto. This is the type that mounts to rear of port cylinder head. Also need the brackets to mount the oil cooler to rear of bellhousing. Do you have these?
#3
Registered
iTrader: (4)
I'd be interested in the valve covers if there in good shape. If you have them would you send pics to [email protected]
Might be interested in the intakes as well.
Might be interested in the intakes as well.
#7
Last 2 pics. the last pic its self is one of the short blocks I can build up to make a 468 modded 420
Fuel Water seperators filter heads with brackets 40 each 75 both shipped.
990 Rec, heads decent shape 350
2- Gen 4 TRS flywheels with couplers 125 each
4 sets- crane gold rockers 125 a set shipped
2 sets - Gen 4 430 Valve covers finned 75 a set
Holley 9022- 800 cfm carb 175
flame arrestor - 80 shipped
Factory dist with cap and wires - 75 shipped
thunderbolt 4 box 50 shipped
Fuel Water seperators filter heads with brackets 40 each 75 both shipped.
990 Rec, heads decent shape 350
2- Gen 4 TRS flywheels with couplers 125 each
4 sets- crane gold rockers 125 a set shipped
2 sets - Gen 4 430 Valve covers finned 75 a set
Holley 9022- 800 cfm carb 175
flame arrestor - 80 shipped
Factory dist with cap and wires - 75 shipped
thunderbolt 4 box 50 shipped