Offshoreonly.com

Go Back  Offshoreonly.com > Offshoreonly Marketplace > Swap Shop
je blower pistons 4.600 bore >

je blower pistons 4.600 bore

Register
FAQ
Calendar
Today's Posts
Search
Vendor Directory
Notices

je blower pistons 4.600 bore

Thread Tools
 
Old 02-03-2013, 11:17 PM
  #1  
Registered
Thread Starter
 
Join Date: Jan 2008
Posts: 2,610
Likes: 0
Received 1 Like on 1 Post
Default je blower pistons 4.600 bore
two sets je blower dish pistions 4.600 bore $1000 both sets
kidapache is offline  
Reply
Old 02-04-2013, 07:25 AM
  #2  
Platinum Member
Platinum Member
iTrader: (5)
 
adk61's Avatar
 
Join Date: Nov 2005
Location: Toronto, Canada
Posts: 2,399
Received 14 Likes on 10 Posts
Default
compression height???
adk61 is offline  
Reply
Old 02-04-2013, 06:10 PM
  #3  
Registered
Thread Starter
 
Join Date: Jan 2008
Posts: 2,610
Likes: 0
Received 1 Like on 1 Post
Default
Originally Posted by adk61
compression height???
8 to 1
kidapache is offline  
Reply
Old 02-04-2013, 06:19 PM
  #4  
Platinum Member
Platinum Member
iTrader: (5)
 
adk61's Avatar
 
Join Date: Nov 2005
Location: Toronto, Canada
Posts: 2,399
Received 14 Likes on 10 Posts
Default
Originally Posted by kidapache
8 to 1
ok lets try this again... pin height... as in what rod length with what stroke in what block std or tall...
adk61 is offline  
Reply
Old 02-04-2013, 10:52 PM
  #5  
Registered
Thread Starter
 
Join Date: Jan 2008
Posts: 2,610
Likes: 0
Received 1 Like on 1 Post
Default
Originally Posted by adk61
ok lets try this again... pin height... as in what rod length with what stroke in what block std or tall...
10.200 deck 6.700 rod 4.500 stroke 124cc head
Last edited by kidapache; 02-04-2013 at 11:26 PM.
kidapache is offline  
Reply
Old 02-05-2013, 09:14 AM
  #6  
Platinum Member
Platinum Member
iTrader: (5)
 
adk61's Avatar
 
Join Date: Nov 2005
Location: Toronto, Canada
Posts: 2,399
Received 14 Likes on 10 Posts
Default
WOW that pin must be right up in there... way into the oil ring land... they using a true arc lock or a pin button, I would be using a button in this case
adk61 is offline  
Reply
Old 02-05-2013, 09:15 AM
  #7  
Platinum Member
Platinum Member
iTrader: (5)
 
adk61's Avatar
 
Join Date: Nov 2005
Location: Toronto, Canada
Posts: 2,399
Received 14 Likes on 10 Posts
Default
post some detailed pics of the piston so we can see the configeration, ring placement, deck style... etc...
adk61 is offline  
Reply
Old 02-05-2013, 09:51 PM
  #8  
Registered
Thread Starter
 
Join Date: Jan 2008
Posts: 2,610
Likes: 0
Received 1 Like on 1 Post
Default
1.307 pin
Attached Thumbnails je blower pistons 4.600 bore-dd.jpg   je blower pistons 4.600 bore-ase.jpg  
kidapache is offline  
Reply
Old 02-06-2013, 08:01 AM
  #9  
Platinum Member
Platinum Member
iTrader: (5)
 
adk61's Avatar
 
Join Date: Nov 2005
Location: Toronto, Canada
Posts: 2,399
Received 14 Likes on 10 Posts
Default
Originally Posted by kidapache
1.307 pin
1.307 + 2.250 + 6.700 = 10.257
something wrong with the math bud... so what I'm thinking is that you have a rod that is 6.635 length which makes more sense, that adds up to 10.192 putting the piston down the hole .008"
Last edited by adk61; 02-06-2013 at 08:03 AM.
adk61 is offline  
Reply
Old 02-06-2013, 10:15 PM
  #10  
Registered
Thread Starter
 
Join Date: Jan 2008
Posts: 2,610
Likes: 0
Received 1 Like on 1 Post
Default
Originally Posted by adk61
1.307 + 2.250 + 6.700 = 10.257
something wrong with the math bud... so what I'm thinking is that you have a rod that is 6.635 length which makes more sense, that adds up to 10.192 putting the piston down the hole .008"
the rod were sold years ago they could be 6.635
kidapache is offline  
Reply



Advanced Search

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.