Baja226sport

iTrader: (28)

He is correct. And Holley/Weiand bought b&m so that's why the W is on the 250.

But anyway they are pretty close but 2 different blowers. Still a good price though!!

1fastlx

Thanks for the info. I was not sure of the time line when holley was buying everything in sight.

1fastlx

Ttt

1fastlx

[ATTACH=CONFIG]548586[/ATTACH][ATTACH=CONFIG]548587[/ATTACH][ATTACH=CONFIG]548588[/ATTACH][ATTACH=CONFIG]548589[/ATTACH]
These are in very serviceable condition as is or very easy weld and grind to bring back to 100%

snapmorgan

iTrader: (2)

do you have the thermostat housings?

1fastlx

No. Only have what is pictured. Blowers, intakes, lower pulleys, 2 sets of upper pulleys (3.5" and 4") and the belts. Im pretty sure thats all.

hoff

interested in the small pulley's

CPM

They are both Weiand 256 blowers, one is a Mercruiser hard anodized case and Weiand machined off, the other is a newer case but has the Mercruiser drive on it, I would say someone lost one blower and purchased a new blower section at one time. Good luck with the sale.

1fastlx

Still for sale! Lots of interest in the intakes. If you are looking for a spare blower pm me Im sure the intakes and pulley setups will sell.

MILD THUNDER

iTrader: (3)

Weird, looks like the rear bearing covers are mismatched. Like they should be swapped around to match the front covers on each blower. They are 256 Weiands, one being a Merc blower (anodized case) other looks to be a non merc blower.

I see one is teflon stripped, is the other one also? I don't believe the 256's were teflon stripped either from merc, or from Weiand. The 250's were, both from B&M, and Weiand (weiand/holley did take over B&M).