Offshoreonly.com

Go Back  Offshoreonly.com > Offshoreonly Marketplace > Swap Shop
Hydromotive p5 25p >

Hydromotive p5 25p

Register
FAQ
Calendar
Today's Posts
Search
Vendor Directory
Notices

Hydromotive p5 25p

Thread Tools
 
Old 05-20-2018 | 06:41 PM
  #1  
Bnbz28
Thread Starter
Registered
 
Joined: May 2018
Posts: 50
Likes: 0
Default Hydromotive p5 25p


5 blade hydro prop,25 pitch, no damage, gonna be to small for new combo. $400 shipped call or text 386-837-7035
Bnbz28 is offline  
Reply
0
Old 06-05-2018 | 09:00 PM
  #2  
SutphenSteph
Registered
5 Year Member
 
Joined: Apr 2018
Posts: 208
Likes: 30
From: MA
Default
Will the prop fit 1.25 prop shaft?
SutphenSteph is offline  
Reply
0
Old 06-05-2018 | 09:14 PM
  #3  
Bnbz28
Thread Starter
Registered
 
Joined: May 2018
Posts: 50
Likes: 0
Default
I believe it will fit both. If you swap the hubs
Bnbz28 is offline  
Reply
0
Old 06-05-2018 | 09:25 PM
  #4  
freekazoid
Registered
 
Joined: Aug 2008
Posts: 1,215
Likes: 10
From: Osage beach
Default
im pretty sure hydros are a fixed hub.. looks like it from the pix as well.
freekazoid is offline  
Reply
0
Old 06-05-2018 | 09:54 PM
  #5  
Bnbz28
Thread Starter
Registered
 
Joined: May 2018
Posts: 50
Likes: 0
Default
Second pic shows the hub removed
Bnbz28 is offline  
Reply
0
Old 06-06-2018 | 08:02 AM
  #6  
Bnbz28
Thread Starter
Registered
 
Joined: May 2018
Posts: 50
Likes: 0
Default
It is interchangeable from big to small. I currently have the small hub for it.
Bnbz28 is offline  
Reply
0
Old 06-06-2018 | 05:56 PM
  #7  
freekazoid
Registered
 
Joined: Aug 2008
Posts: 1,215
Likes: 10
From: Osage beach
Default
so if you look at the back side of the prop that hole determines what size shaft it will accept. unless the inner sleeve is removable it is a fixed hub.
freekazoid is offline  
Reply
0
Old 06-06-2018 | 08:53 PM
  #8  
Bnbz28
Thread Starter
Registered
 
Joined: May 2018
Posts: 50
Likes: 0
Default
Like i said it is interchangable.....
Bnbz28 is offline  
Reply
0
Old 06-06-2018 | 09:10 PM
  #9  
Padraig
Registered
25 Year Member
 
Joined: Oct 2000
Posts: 3,784
Likes: 650
From: Lakewood, NY, USA
Default
Freek, all you need is a new 1.25 Merc Hub. The newer a Hydromotive props use the Merc hubs.

Bnbz, how did it run on your 280 Velocity? What engine?

padraig
Padraig is offline  
Reply
0
Old 06-06-2018 | 09:19 PM
  #10  
Bnbz28
Thread Starter
Registered
 
Joined: May 2018
Posts: 50
Likes: 0
Default
Originally Posted by Padraig
Freek, all you need is a new 1.25 Merc Hub. The newer a Hydromotive props use the Merc hubs.

Bnbz, how did it run on your 280 Velocity? What engine?

padraig
just bought this one it had a 548 in it but needed a lot of help, previous owner put the motor together and cam timing was off 2 teeth lol. Only ran 68mph. That motor is out and the new 598 should be done in the next few weeks, boat should run between 100-105 mph. Had a 280 from 2001-2011 with a 650horse motor that ran a best of 95.3. This will make about 100horse more than that one
Bnbz28 is offline  
Reply
0



Advanced Search

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.