Set of 540s
10-29-2019 | 04:46 PM
#1
Thread Starter
Brotherhood #1
Joined: Sep 2006
Posts: 12,026
Likes: 111
From: Swansea Mass
Set of 540s
Pair of 540 Merlin block motors, originally had whipples on them. Sold the whipples bought intakes and carbs to make complete again.
merlin heads
dart intakes
dominator carb
eagle Lower ends
Roller cams and rockers
12 qts pan
MSD dist and box
will have matching cross overs and T housings also.
lower crank pulleys will be included.
come as seen.
have video of the. Running.
13k for the pair.
hour meter read 55.
boat was turn key runner when pulled.
10-30-2019 | 07:58 AM
#4
Thread Starter
Brotherhood #1
Joined: Sep 2006
Posts: 12,026
Likes: 111
From: Swansea Mass
If you notice there are no bolts in the intake. No where did I state I installed them and ran them. I have videos of motors in boat.
if you would like I’m happy to install, and dyno tune then. Will have video on the dyno and sheets to accompany.
Last set I did the same with, sold blower and installed intakes and carbs they made 700. Not saying these will or same set up but they will make decent power due to size alone.
I can give you my address for a deposit
if you would like I’m happy to install, and dyno tune then. Will have video on the dyno and sheets to accompany.
Last set I did the same with, sold blower and installed intakes and carbs they made 700. Not saying these will or same set up but they will make decent power due to size alone.
I can give you my address for a deposit
10-31-2019 | 07:19 AM
#5
Registered
Joined: Dec 2017
Posts: 178
Likes: 181
If you notice there are no bolts in the intake. No where did I state I installed them and ran them. I have videos of motors in boat.
if you would like I’m happy to install, and dyno tune then. Will have video on the dyno and sheets to accompany.
Last set I did the same with, sold blower and installed intakes and carbs they made 700. Not saying these will or same set up but they will make decent power due to size alone.
I can give you my address for a deposit
if you would like I’m happy to install, and dyno tune then. Will have video on the dyno and sheets to accompany.
Last set I did the same with, sold blower and installed intakes and carbs they made 700. Not saying these will or same set up but they will make decent power due to size alone.
I can give you my address for a deposit
