502 MPI Parts
#1
Platinum Member
Platinum Member
Thread Starter
iTrader: (2)
502 MPI Parts
1998 502 MPI MEFI-3 parts: Two of everything.
Upper and lower intake manifolds.
MEFI-3 ECMs, untouched.
Throttle bodies.
ECM and injector wire harnesses.
Cool fuel pumps with fuel lines (no covers).
Fuel rails for short-style MEFI-3 injectors.
Injector sets (brand new from BUP in spring of 2019 - maybe 15 hours of run time if that?)
Circuit breaker/Mercathode bracket (just the bracket).
No distributors, coils, knock sensors..
Parts will need to be cleaned for installation. Were used in brackish and salt water - intakes are in good shape - cool fuel pump brackets will need a little attention. These came off of engines that were last run a month ago or so. I'd prefer to sell as complete sets but may consider parting out if no takers.
$1200 each plus shipping. I'd prefer local pickup if possible (the manifolds are heavy).
I will get some pics added later.
Thanks!
-Tom
Upper and lower intake manifolds.
MEFI-3 ECMs, untouched.
Throttle bodies.
ECM and injector wire harnesses.
Cool fuel pumps with fuel lines (no covers).
Fuel rails for short-style MEFI-3 injectors.
Injector sets (brand new from BUP in spring of 2019 - maybe 15 hours of run time if that?)
Circuit breaker/Mercathode bracket (just the bracket).
No distributors, coils, knock sensors..
Parts will need to be cleaned for installation. Were used in brackish and salt water - intakes are in good shape - cool fuel pump brackets will need a little attention. These came off of engines that were last run a month ago or so. I'd prefer to sell as complete sets but may consider parting out if no takers.
$1200 each plus shipping. I'd prefer local pickup if possible (the manifolds are heavy).
I will get some pics added later.
Thanks!
-Tom
The following users liked this post:
SB (02-10-2021)
#5
Platinum Member
Platinum Member
Thread Starter
iTrader: (2)
Fuel pump assembly and wiring still on starboard engine as well as ECM. But they’re all the same. Mounting bolts etc are all there. Thanks for looking.
The following users liked this post:
TomZ (09-16-2020)
#8
VIP Member
VIP Member
I’m going in the same direction. I’m selling 2 excellent condition complete 500efi systems. I’m building twin 509’s with AED 850 carbs, single plane manifold and crane’s 741 cam that’s equivalent the Mercury’s 525 cam.
The following users liked this post:
TomZ (09-16-2020)